We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White square ceiling-mounted wireless access point with smooth matte finish and recessed LED indicator

TP-Link

TP-Link Omada EAP727 BE5000 Wi-Fi 7 access point

SKU CH-Q9FY-P0K78

Dual-band Wi-Fi 7 access point with 2.5 Gigabit Ethernet and PoE+ support for ceiling or wall mounting

  • 0 Gbps combined dual-band throughput
  • 5 GbE PoE+ port enables multi-gig wired backhaul
  • 4K-QAM modulation carries 20 % more data per symbol
  • Multi-Link Operation boosts reliability and speed
  • 16 SSIDs provide flexible guest and IoT segmentation

Dual-Band Wi-Fi 7 Access Point

The TP-Link Omada EAP727 is an indoor wireless access point built for Wi-Fi 7 networks. It operates on 2.40 GHz and 5 GHz bands with internal antennas and a 2.5 Gigabit Ethernet port. The unit supports 802.3 at PoE for flexible ceiling, wall or junction-box mounting and draws 15.80 W.

Suits Multi-Gigabit Indoor Deployments

This access point fits environments that need 5.0 Gbps peak throughput and multi-link operation across 16 SSIDs. Buyers who require outdoor-rated hardware, a 10 Gbps uplink or more than one Ethernet port should consider other options.

5-Stream BE5000 Throughput Decides Fit

The radio delivers 4,324 Mbps on 5 GHz and 688 Mbps on 2.4 GHz using 4K-QAM and 12 bits per symbol. If your wired backbone or client mix cannot use that capacity, a lower-spec model will suffice.

Highlights

  • 0 Gbps combined dual-band throughput
  • 5 GbE PoE+ port enables multi-gig wired backhaul
  • 4K-QAM modulation carries 20 % more data per symbol
  • Multi-Link Operation boosts reliability and speed
  • 16 SSIDs provide flexible guest and IoT segmentation

Specifications

BrandTP LINK

Questions about this item

What PoE standard must my switch or injector support to power the EAP727?

The access point requires 802.3 at PoE+ and draws up to 15.80 W, so the power source must deliver at least that much on the 2.5 Gigabit Ethernet port.

Will the 2.5 GbE uplink bottleneck traffic when I keep older 1 GbE switches downstream?

The 2.5 Gigabit Ethernet port negotiates down to 1 GbE automatically, so legacy switches work but total throughput will be capped at the slower link speed.

How can I confirm the AP is delivering Wi-Fi 7 speeds after installation?

In the Omada controller check the client list for BE-capable stations and verify 5 GHz rates near 4 324 Mbps and 2.4 GHz rates near 688 Mbps under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.