We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small white WiFi LED controllers with 4-pin connectors

TP-LINK LED Controller-W2 WiFi RGB Controller 2 Pack 12 V 100 W

SKU CH-5E21-6HD9C

A two-pack of 12 V, 100 W Wi-Fi RGB controllers that let you adjust 16 million colours, sync strips to music and automate lighting by voice or app

  • ProtocolWireless
  • ColorWhite
  • TypeHandheld & Tabletop Remotes
  • Specifications2 x WiFi controller, 2 x 4-pin connector, 100 watts, 12 volt
  • Weight0.034 kilograms
  • Package Contents2 x WiFi controller, 2 x 4-pin connector
  • Control LED strips from anywhere with the free Magic Home app
  • Adjust brightness and colour by voice using Alexa or Google Assistant
  • Lights pulse to music for party or mood lighting
  • Group multiple strips and schedule timers for wake-up or bedtime
  • Two controllers and 4-pin connectors included for 12 V, 100 W strips

Two-pack WiFi LED controller for RGB strips

This set includes two TP-LINK LED Controller-W2 units, each rated at 12 V and 100 W. They connect to standard 4-pin RGB strip lights and join a home WiFi network for app and voice control. The package suits renters or homeowners who want wireless colour management without running extra cables.

Sustained operation stays within the 100 W limit

Each controller handles continuous loads up to its rated power without throttling. The Magic Home app reports real-time status, so you can verify that combined strip lengths remain under the 100 W ceiling during extended use. Overloading a single unit will trip its protection and cut power to the attached strips.

Simple wiring but check polarity and strip length

Plug the 4-pin connectors into the strip arrows matching the controller arrows; reversed pins cause no light or wrong colours. The app pairs each unit in under a minute, yet buyers sometimes forget to assign strips to separate groups, leading to unintended simultaneous changes. Ensure total strip power per controller stays at or below 100 W to avoid shutdowns.

Highlights

  • Control LED strips from anywhere with the free Magic Home app
  • Adjust brightness and colour by voice using Alexa or Google Assistant
  • Lights pulse to music for party or mood lighting
  • Group multiple strips and schedule timers for wake-up or bedtime
  • Two controllers and 4-pin connectors included for 12 V, 100 W strips

Specifications

BrandTP-LINK
ModelLED Controller-W2
ProtocolWireless
ColorWhite
TypeHandheld & Tabletop Remotes
Part NumberLED Controller-W2
Specifications2 x WiFi controller, 2 x 4-pin connector, 100 watts, 12 volts_of_direct_current, DC, App Control, application, Multicolor, 1, 0.034 kilograms, Aubric, LED Controller-W2
Weight0.034 kilograms
Package Contents2 x WiFi controller, 2 x 4-pin connector

Questions about this item

Does the controller generate noticeable heat when powering a 100 W LED strip continuously?

The unit is rated for 100 W at 12 V DC; heat output will depend on the actual load and ventilation around the controller.

What must I already have to use these controllers?

You need 12 V RGB LED strips with 4-pin connectors, a Wi-Fi network, and a smartphone running the Magic Home app.

Will the controller work with older 12 V RGB strips I already own?

Yes, if the strips use a standard 4-pin connector and run on 12 V DC they can be connected directly to the included connectors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.