We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White wall-mounted switch and E26/E27 light socket kit, 100ft range, 120V

TP-LINK HRLS11G Wireless Light Socket Kit 100FT 120V E26/E27

SKU CH-ZP8R-3QTG4 MPN HRLS11G

Wireless E26/E27 light socket kit with wall-mounted switch controls pull-chain fixtures up to 100 ft away without wiring

  • ColorWhite
  • TypeHandheld & Tabletop Remotes
  • Specifications1 Wall Mounted Switch and 1 Bulb Base, Copper, 100, 120 volt
  • Features1 Wall Mounted Switch and 1 Bulb Base, remote control black
  • Dimensions72"
  • Weight0.141 kilograms
  • Replaces fragile pull-chain switches with wall-mounted remote
  • Installs in seconds — no wiring or electrician required
  • Controls lights through walls up to 100 ft away
  • One switch operates multiple sockets or vice versa
  • ETL-listed safety for 120 V circuits up to 100 W

Wireless light-socket kit for pull-chain fixtures

This TP-LINK HRLS11G kit replaces a pull-chain switch with a wireless wall-mounted controller and an E26/E27 lamp socket. It suits renters, elderly users or anyone who wants a light switch by the door without running new wiring. The 100-foot RF range works through walls to control garage, basement or closet lights.

Battery-powered switch and pre-paired socket

The kit includes a CR2032 battery already installed in the handheld switch, so it works immediately after mounting. The socket supports LED or CFL bulbs up to 60 watts and incandescent bulbs up to 100 watts. One switch can be programmed to control multiple sockets, or several switches can operate a single socket.

Check voltage, bulb type and mounting space

Your circuit must supply 120 volts AC at 60 hertz. Verify the fixture uses a standard medium E26 or E27 base and that the bulb does not exceed the listed wattage limits. The socket adds about 1.97 inches of length; confirm there is enough clearance inside the shade or housing before ordering.

Highlights

  • Replaces fragile pull-chain switches with wall-mounted remote
  • Installs in seconds — no wiring or electrician required
  • Controls lights through walls up to 100 ft away
  • One switch operates multiple sockets or vice versa
  • ETL-listed safety for 120 V circuits up to 100 W

Specifications

BrandTP-LINK
ModelHRLS11G
ColorWhite
TypeHandheld & Tabletop Remotes
Part NumberHRLS11G
Specifications1 Wall Mounted Switch and 1 Bulb Base, Copper, 100, 120 volts, 3 L x 3 W x 4.7 H inches, Wall Mount, HRLS11G, DEWENWILS, 2ATYX-006, true, false
Features1 Wall Mounted Switch and 1 Bulb Base, remote control black
Dimensions72"
Weight0.141 kilograms
Package Contents1 Wall Mounted Switch and 1 Bulb Base

Questions about this item

How often will the CR2032 battery in the wall switch need replacing?

The wall switch uses a 3V CR2032 battery that is included; typical life is several months to a year depending on how often you press the button, and you simply swap in a fresh coin cell when the LED indicator dims.

What is the maximum bulb wattage the E26/E27 socket can handle continuously?

The socket is rated for LED or CFL bulbs up to 60 W and incandescent bulbs up to 100 W at 120 VAC, so stay within those limits to avoid overheating the receiver.

Does the 433.92 MHz radio generate noticeable heat or draw extra power when the light stays on all day?

The receiver only draws standby power while waiting for a signal; the RF module itself produces no perceptible heat and the socket remains cool during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.