Extreme Networks
Extreme Networks Silhouette Ceiling Mounting Bracket 14 or 18
$23.99
0.00027816BTC
In stock
TP-Link
TP-Link EAP603-Outdoor AX1800 Wi-Fi 6 access point
Weather-resistant dual-band Wi-Fi 6 access point delivering up to 1.8 Gbps for 250-plus users with pole or wall mounting and IP65 protection
- ColorWhite
- # of Users250+
- Standards5 GHz: IEEE 802.11a/n/ac/ax 2.4 GHz: IEEE 802.11b/g/n/ax
- WiFi GenerationWi-Fi 6
- Wireless Data RatesAX1800 / Up to 1.8Gbps
- SecurityACL MAC Filter 802.1X Authentication MAC-Based Authenticatio
- Wi-Fi 6 delivers up to 1.8 Gbps combined throughput
- Dual-band 2.4 GHz and 5 GHz operation supports 250-plus simultaneous users
- IP65-rated enclosure withstands -30 °C to 70 °C operating temperatures
- Single PoE+ port powers the unit and provides gigabit wired backhaul
- Omada centralised management across controller, cloud and software platforms
Outdoor Wi-Fi 6 access point
The TP-Link EAP603-Outdoor is a dual-band Wi-Fi 6 access point built for exterior environments. It supports up to 250+ concurrent users and delivers AX1800 wireless data rates across 2.4 GHz and 5 GHz bands. The IP65-rated enclosure operates from -30 °C to 70 °C, making it suitable for pole or wall mounting in exposed locations. It is designed for businesses needing reliable outdoor coverage without running separate power lines.
PoE+ power and Omada integration
The unit draws power through a single 10/100/1000M RJ45 port using 802.3at PoE+, consuming 15.8 W at maximum load and 4.8 W idle. Mounting kits for both pole and wall installation are included in the package. Management is handled through the Omada controller platform, which supports cloud, hardware and software deployments for centralised configuration and monitoring.
Capacity and coverage limits
The access point provides up to 1.8 Gbps aggregate throughput and covers an area of up to 3200 ft with its four external omnidirectional antennas. Sixteen SSIDs are available, eight per band, each secured by WPA3, 802.1X or captive-portal authentication. The single gigabit uplink and PoE+ power budget set the practical ceiling for high-density client traffic and backhaul bandwidth.
Highlights
- Wi-Fi 6 delivers up to 1.8 Gbps combined throughput
- Dual-band 2.4 GHz and 5 GHz operation supports 250-plus simultaneous users
- IP65-rated enclosure withstands -30 °C to 70 °C operating temperatures
- Single PoE+ port powers the unit and provides gigabit wired backhaul
- Omada centralised management across controller, cloud and software platforms
Specifications
| Brand | Omada by TP-Link |
|---|---|
| Model | EAP603-Outdoor |
| Color | White |
| # of Users | 250+ |
| Standards | 5 GHz: IEEE 802.11a/n/ac/ax 2.4 GHz: IEEE 802.11b/g/n/ax |
| WiFi Generation | Wi-Fi 6 |
| Wireless Data Rates | AX1800 / Up to 1.8Gbps |
| Security | ACL MAC Filter 802.1X Authentication MAC-Based Authentication WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise, Enhanced Open, and None Radius Accounting PPSK without Radius, PPSK with Radius (Generic Radius with bound MAC/EKMS/Generic Radius with unbound MAC) Captive Portal: No Authentication, Simple Password, Hotspot (Voucher / Local User / SMS / RADIUS / Form Auth), RADIUS Server, External LDAP Server, External Portal Server, Pre-Authentication Access, and Authentication-Free Client EAP Types: EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-CHAP, EAP-SIM, EAP-AKA, EAP- |
| Frequency Band | 2.4 GHz / 5 GHz |
| Antenna | Wi-Fi - 2.4 GHz: 2 × 4 dBi (peak gain), external omnidirectional antennas - 5 GHz: 2 × 5 dBi (peak gain), external omnidirectional antennas *Note: The gains above are the single-antenna peak gains. IoT - Bluetooth: 1 × 4 dBi (peak gain), internal omnidirectional antennas |
| Transmitted Power | Maximum transmit power: CE (ERIP) - 2.4 GHz: 20 dBm - 5 GHz: 23 dBm in U-NII-1, 23 dBm in U-NII-2A, 29 dBm in U-NII-2C, FCC (Conducted Power) - 2.4 GHz: 25 dBm - 5 GHz: 27 dBm in U-NII-1, 24 dBm in U-NII-2A, 24 dBm in U-NII-2C, 27 dBm in U-NII-3 Minimum transmit power CE (ERIP) - 2.4 GHz: 7 dBm - 5 GHz: 6 dBm in U-NII-1, 6 dBm in U-NII-2A, 6 dBm in U-NII-2C, 6 dBm in U-NII-3 FCC (Conducted Power) - 2.4 GHz: 4 dBm - 5 GHz: 4 dBm in U-NII-1, 4 dBm in U-NII-2A, 4 dBm in U-NII-2C, 4dBm in U-NII-3 Adjustable power increment: 1 dBm *Note: MIMO combined power, excluding antenna gains. The a |
| Mounting Location | Pole Mount (Kits included) Wall Mount (Kits included) |
| Buttons | 1 x Reset button: Press the button for longer than 5 seconds to make the device restore to factory settings. |
| LAN Ports | 1 x 10/100/1000M |
| Multiple SSIDs | 16 (8 on each band) |
| Power Supply | Input: 802.3at PoE+: 42.5 - 57 V, 0.36A |
| Max Power Consumption | 802.3at (PoE+): 15.8w, 2.4GHz radio 2×2, 5GHz radio 2×2, wired link rate can be up to 1 Gbps, etc. Idle mode: 4.8W(PoE) |
| Temperature | Operating Temperature: -30 °C - 70 °C (-22 °F - 158 °F) Storage Temperature: -40 °C - 70 °C (-40 °F - 158 °F) |
| Humidity | Operating Humidity: 10% - 90% non-condensing Storage Humidity: 5% - 90% non-condensing |
| Dimensions | 9.06" x 8.17" x 2.74" |
| Features | Maximum number of BSSIDs: 16 (8 on each band) Maximum number of associated STAs: 250+ Guest Network ACS (Automatic Channel Selection) Airtime Fairness Band Steering 802.11 Rate Control Rogue AP Detection URL Filtering WLAN Optimization Lock to AP SSID/Client Rate Limit Load Balance Seamless Roaming (802.11k/v/r, Non-Stick Roaming, Ping-Pong Roaming Suppression, AI Roaming)§ Multicast/Broadcast Management (Multicast-to-Unicast Conversion, ARP-to-Unicast Conversation, Multicast Filtering, Multicast/Broadcast Rate Limit) QoS (Quality of Service) |
| Package Contents | EAP603-Outdoor Passive PoE Adapter Power Cord Installation Guide Mounting Kit Waterproof Kit |
| Shipping weight | 0.89 kg |
| Package size | 218 × 218 × 70 mm |
Questions about this item
Will the external 4 dBi and 5 dBi omnidirectional antennas need periodic replacement?
The antennas are fixed external omnidirectional units rated at 4 dBi for 2.4 GHz and 5 dBi for 5 GHz; they have no moving parts and no replacement interval is defined by the manufacturer.
What limits sustained throughput on the single 10/100/1000M Ethernet port?
The wired link rate is capped at 1 Gbps, so the PoE+ uplink becomes the bottleneck before the AX1800 wireless radios reach their maximum combined 1.8 Gbps data rate.
How much heat and power does the unit draw when running continuously?
Maximum consumption is 15.8 W via 802.3at PoE+ while idle draw falls to 4.8 W; the fanless IP65 enclosure is rated for continuous operation from -30 °C to 70 °C.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
RUCKUS WIRELESS
RUCKUS WIRELESS 10G-SFPP-LR-S SFP+ transceiver module 10 GigE
$233.99
0.00271305BTC
In stock
