We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal desktop switch with five RJ45 ports

TP-Link

TP-Link DS105GP 5-Port Gigabit Unmanaged PoE+ Switch

SKU CH-3HMB-K967C

Five-port Gigabit switch delivers data and power over one cable with four PoE+ ports up to 30 W each and 65 W total budget

  • Five Gigabit RJ45 ports for wired speed
  • Four PoE+ ports deliver data and power on one cable
  • Up to 30 W per PoE port for demanding devices
  • 65 W total PoE budget powers multiple endpoints
  • Extend Mode reaches 250 m for distant cameras

Five-port Gigabit switch with PoE+

The TP-Link DS105GP provides five 10/100/1000 Mbps RJ45 ports in a desktop form factor. Four ports deliver up to 30 W each for IEEE 802.3af/at powered devices, with a total PoE budget of 65 W. It suits installers deploying access points, IP cameras or VoIP phones where mains outlets are unavailable.

Plug-and-play with Extend Mode

No configuration is required; the switch negotiates speed and power automatically. Extend Mode pushes data and power up to 250 m (820 ft) on Cat5e or better cable, though throughput drops to 10 Mbps beyond the standard 100 m limit. PoE Auto Recovery reboots unresponsive powered devices without manual intervention.

Steady throughput with QoS priority

802.1p/DSCP QoS tags keep latency-sensitive streams smooth during sustained load. The 65 W power budget is shared across all four PoE+ ports, so connecting four 30 W devices simultaneously will exceed the limit. The metal enclosure passively dissipates heat for continuous operation.

Highlights

  • Five Gigabit RJ45 ports for wired speed
  • Four PoE+ ports deliver data and power on one cable
  • Up to 30 W per PoE port for demanding devices
  • 65 W total PoE budget powers multiple endpoints
  • Extend Mode reaches 250 m for distant cameras

Specifications

BrandTP LINK

Questions about this item

How can I confirm the switch is delivering PoE+ power to connected devices after setup?

Each PoE+ port supplies up to 30 W and the total PoE budget is 65 W; the port LEDs will show active power delivery when IEEE 802.3af/at devices are connected.

What comes in the box and do I need to buy any cables or power adapters separately?

The switch includes the unit and its internal power supply; you only need to provide standard Ethernet cables for the five 10/100/1000 Mbps RJ45 ports.

Which port should I use if I need the 250 m extended transmission range for a distant access point?

Enable Extend Mode on the switch; any of the four PoE+ ports can then carry data and power up to 250 m (820 ft) to a compatible powered device.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.