Extreme Networks
Extreme Networks Silhouette Ceiling Mounting Bracket 14 or 18
$23.99
0.0002851BTC
In stock
TP-Link
TP-Link CPE210 2.4GHz 300Mbps 9dBi Outdoor Access Point
2.4 GHz outdoor access point with 9 dBi directional antenna delivering up to 300 Mbps over 5 km links
- StandardsIEEE 802.11b/g/n (with Pharos MAXtream disabled)
- Wireless Data RatesUp to 300Mbps
- AntennaBuilt-in 9dBi 2x2 Dual-polarized Directional Antenna Beam Wi
- Transmitted Power27dBm/500mw (Adjustable power by 1dBm) Note: Maximum transmi
- Receiver Sensitivity802.11b: 11M: -95dBm, 5.5M: -96dBm, 2M: -96dBm, 1M: -96dBm 8
- System RequirementsMicrosoft Windows 98SE, NT, 2000, XP, Vista or Windows 8, Wi
- Up to 300Mbps wireless speed for extended outdoor links
- 9dBi directional antenna focuses signal up to 5km range
- 27dBm adjustable transmit power adapts to local regulations
- Passive PoE on two shielded ports simplifies cabling
- IPX5-rated ASA enclosure resists rain and dust
Outdoor directional AP for point-to-point links
The TP-Link CPE210 is a 2.4 GHz wireless access point built for long-range outdoor connections. Its integrated 9 dBi dual-polarised directional antenna focuses signal into a 65° horizontal and 35° vertical beam. Passive PoE on the main Ethernet port simplifies installation where mains power is unavailable. The IPX5-rated enclosure withstands rain and dust in exposed locations.
300 Mbps maximum PHY rate on 40 MHz channels
Wireless throughput tops out at 300 Mbps when the radio operates at 40 MHz channel width. Narrower 20 MHz, 10 MHz and 5 MHz modes reduce the peak rate to 144.4 Mbps, 72.2 Mbps and 36.1 Mbps respectively. The 10/100 Mbps Ethernet ports then become the practical bottleneck for any traffic leaving the device. Pharos MAXtream TDMA can be enabled to improve airtime efficiency on busy links.
Suitable for clear-line-of-sight spans
The 27 dBm transmit power and 9 dBi gain combine to deliver usable signal beyond 5 km when both ends have unobstructed Fresnel zones. Receiver sensitivity reaches -96 dBm at the lowest 802.11b rates, so marginal links still pass management frames. Throughput drops sharply once the Ethernet port saturates at 100 Mbps or when heavy rain attenuates the 2.4 GHz signal. Not suited for indoor multi-room coverage or client densities that exceed the radio's single-stream capacity.
Highlights
- Up to 300Mbps wireless speed for extended outdoor links
- 9dBi directional antenna focuses signal up to 5km range
- 27dBm adjustable transmit power adapts to local regulations
- Passive PoE on two shielded ports simplifies cabling
- IPX5-rated ASA enclosure resists rain and dust
Specifications
| Brand | TP-Link |
|---|---|
| Model | CPE210 |
| Standards | IEEE 802.11b/g/n (with Pharos MAXtream disabled) |
| Wireless Data Rates | Up to 300Mbps |
| Antenna | Built-in 9dBi 2x2 Dual-polarized Directional Antenna Beam Width: 65° (H-Plane) / 35° (E-Plane) Note: For more details, please refer to datasheet |
| Transmitted Power | 27dBm/500mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. |
| Receiver Sensitivity | 802.11b: 11M: -95dBm, 5.5M: -96dBm, 2M: -96dBm, 1M: -96dBm 802.11g: 54M: -79dBm, 48M: -80dBm, 36M: -84dBm, 6-24M: -88dBm 802.11n: MCS15: -76dBm, MCS14: -78dBm, MCS13: -80dBm, MCS12: -84dBm, MCS11: -87dBm, MCS10: -91dBm, MCS9: -93dBm, MCS8: -96dBm, MCS7: -76dBm, MCS6: -78dBm, MCS5: -80dBm, MCS4: -84dBm, MCS3: -87dBm, MCS2: -91dBm, MCS1: -93dBm, MCS0: -96dBm |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. |
| Interface | 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough) 1 Grounding Terminal 1 Reset Button |
| Buttons | Remote Reset Button |
| Power Supply | Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC |
| Dimensions | 2.36" x 8.82" x 3.11" (H x W x D) |
| Features | Built-in 9dBi 2x2 dual-polarized directional MIMO antenna Adjustable transmission power from 0 to 27dBm/500mw System-level optimization for more than 5km long range wireless transmission TP-LINK Pharos MAXtream TDMA(Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency, ideal for PTMP applications Centralized Management System – Pharos Control AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes Outdoor stabilized enclosure with IPX5 waterproof certification Dual Ethernet ports and grounding terminal integra |
Questions about this item
What real-world throughput can I expect from the 300 Mbps rating on this CPE210?
The 300 Mbps figure is the maximum PHY rate on a 40 MHz channel using 802.11n MIMO; actual TCP throughput will be lower and depends on distance, interference and the 10/100 Mbps Ethernet ports.
Which Ethernet standard do the two shielded ports on this unit support and what does that limit?
Both LAN0 and LAN1 are 10/100 Mbps ports, so the wired link caps at 100 Mbps full-duplex even though the wireless PHY can reach 300 Mbps.
What mounting hardware and clearance does the CPE210 need for outdoor installation?
The enclosure measures 224 × 79 × 60 mm (H × W × D) and includes a pole-mount bracket; it requires a mast diameter that accepts the supplied U-bolts and a clear line-of-sight within the 65° horizontal by 35° vertical beam.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
RUCKUS WIRELESS
RUCKUS WIRELESS 10G-SFPP-LR-S SFP+ transceiver module 10 GigE
$233.99
0.0027808BTC
In stock
