TOWOT Sn63 Pb37 Solder Wire 0.6mm 50g 1.8% Flux
Sn63 Pb37 rosin-core solder wire, 0.6 mm diameter, 50 g reel, 1.8 % flux for electrical joints
- Compatibility/FitmentH-0650
- Standards/Certificationschemical: lead
- Sn63 Pb37 alloy melts at a low temperature for quick joints
- 8 % rosin flux cleans surfaces while you solder
- 6 mm diameter suits fine-pitch board work
- 50 g spool covers multiple repair jobs
- Suitable for circuit boards, TVs, radios and DIY projects
Alloy and flux make-up
This solder wire uses a 63/37 tin-lead alloy with a 1.8% rosin flux core. The eutectic composition melts at a single temperature, giving consistent flow for electrical joints. It is supplied on a 50 g spool at a diameter of 0.6 mm.
Suited to fine board work; not for heavy cable
The thin diameter makes it ideal for circuit-board repair, hobby electronics and small appliance soldering where precision matters. Users joining thick wires, large terminals or plumbing-scale copper will find the wire too small and the flux volume insufficient for those joints.
Capacity and headroom
A 50 g reel provides enough material for dozens of small through-hole or surface-mount connections on typical boards. Extended production runs or high-volume assembly will consume the spool quickly, requiring additional reels to maintain workflow.
Highlights
- Sn63 Pb37 alloy melts at a low temperature for quick joints
- 8 % rosin flux cleans surfaces while you solder
- 6 mm diameter suits fine-pitch board work
- 50 g spool covers multiple repair jobs
- Suitable for circuit boards, TVs, radios and DIY projects
Specifications
| Compatibility/Fitment | H-0650 |
|---|---|
| Standards/Certifications | chemical: lead |
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
