We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Total Micro projector lamp module black housing 200W compatible Epson PowerLite 900 92 93 95

Total Micro Technologies

Total Micro Technologies V13H010L60-TM Projector Lamp 200W 8.80oz Epson PowerLite 900 92 93 95

SKU CH-QWPQ-C5XFW MPN V13H010L60-TM

Replacement 200 W lamp compatible with Epson PowerLite 900, 92, 93 and 95 projectors

  • TypeConsumer Electronics
  • 200 W lamp delivers bright projection for Epson PowerLite models
  • 80 oz lightweight design simplifies ceiling or tabletop installation
  • Compatible with PowerLite 900, 92, 93 and 95 projectors
  • 90 day limited warranty covers early-life failures

Compatible Epson PowerLite projector lamp

This Total Micro Technologies replacement lamp is rated at 200 watts and weighs approximately 8.80 ounces. It fits the Epson PowerLite 900, 92, 93 and 95 series LCD projectors. The unit is supplied new and carries a 90-day limited warranty.

Thermal output and power consumption

At 200 watts the lamp produces significant heat during normal projection, so the host projector’s internal cooling system must remain unobstructed. Fan noise will vary with the projector model and its temperature management. The lamp draws its rated power continuously while the projector is running.

Highlights

  • 200 W lamp delivers bright projection for Epson PowerLite models
  • 80 oz lightweight design simplifies ceiling or tabletop installation
  • Compatible with PowerLite 900, 92, 93 and 95 projectors
  • 90 day limited warranty covers early-life failures

Specifications

BrandTotal Micro
TypeConsumer Electronics
Shipping weight0.25 kg
Package size51 × 51 × 51 mm

Questions about this item

How do I install the V13H010L60-TM lamp into my Epson PowerLite 900, and which step do people often miss?

Power off and unplug the projector, let it cool completely, remove the lamp cover, loosen the securing screws, pull out the old module by its handle, insert the new 200 W lamp until it seats firmly, retighten the screws, replace the cover, then reset the lamp timer in the menu — the step most often missed.

What maintenance or replacement will the V13H010L60-TM lamp need after it has been used for a while?

The 200 W lamp is a consumable; when brightness drops or the projector signals end of life, replace the entire module — no separate filter or bulb service is required for this unit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.