Toshiba
Toshiba TLPLW7 200W projector lamp
A new 200W replacement lamp module with bulb and housing, rated for 2,000 to 3,000 hours
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Genuine Toshiba TLPLW7 module with housing for simple installation
- 200W UHP bulb delivers bright, consistent projection
- Up to 2,000 hours normal or 3,000 hours economy lamp life
- Built to ISO 9001 quality standards for reliable performance
- Supplied new and ready to fit compatible Toshiba projectors
Genuine Toshiba TLPLW7 200W Replacement Lamp
The Toshiba TLPLW7 is a new 200W projector lamp module supplied as a complete bulb-and-housing assembly. It is designed for owners of compatible Toshiba projectors who need a ready-to-install replacement when the original lamp reaches end of life.
Replaces Worn Original Lamp Modules
This unit replaces a depleted factory lamp inside the same projector model. The jump is worth it when the existing lamp dims, flickers or triggers a replacement warning after approaching 2,000 hours in normal mode or 3,000 hours in economy mode.
Limited By UHP Lamp Technology
The UHP 200W bulb defines the practical limits of brightness, heat output and rated lifespan. Output will gradually decline over the rated hours and the projector will require another full module swap once the lamp reaches its service limit.
Highlights
- Genuine Toshiba TLPLW7 module with housing for simple installation
- 200W UHP bulb delivers bright, consistent projection
- Up to 2,000 hours normal or 3,000 hours economy lamp life
- Built to ISO 9001 quality standards for reliable performance
- Supplied new and ready to fit compatible Toshiba projectors
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 200W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What projector models accept the TLPLW7 lamp module?
The TLPLW7 module fits Toshiba projectors designed for this specific lamp type; check your projector manual for the TLPLW7 part number before ordering.
How do I install the TLPLW7 lamp and what step is often missed?
Power off and unplug the projector, let it cool, remove the lamp cover, loosen the securing screws, slide the old module out, insert the new TLPLW7 unit firmly until seated, retighten screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the common error.
When should I replace the TLPLW7 lamp and what indicates end of life?
Expect about 2,000 hours in normal mode or 3,000 hours in economy mode; replace the module when brightness drops noticeably, the projector warns of lamp end, or the lamp fails to ignite.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ID TECH IDMB-333133B credit card reader
- MagStripe Reader
- Keyboard Wedge
Brother TZES121 9mm Black on Clear Extra Strength Adhesive Tape pos accessory
- Label Accessories
- Black on Clear Indu…
Intermec E23067 DuraTran II Gloss Polyester Thermal Transfer Labels pos accessory
- Thermal Transfer Pr…
- Desktop



