Toshiba
Toshiba TLPLV2 projector lamp 165W 2000 3000 hrs
A 165 W UHP replacement lamp module with bulb and housing pre-assembled, rated for 2,000 hours normal or 3,000 hours economy use
- TypeUHP
- Wattage165W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module saves setup time
- 165W UHP bulb delivers specified brightness
- 2000 hrs normal mode extends replacement interval
- 3000 hrs economy mode reduces operating cost
- Built to ISO9001 quality standards for reliability
Direct replacement module
The Toshiba TLPLV2 is a new projector lamp module that arrives with a 165W UHP bulb already fitted into its housing. It is intended for owners of compatible Toshiba projectors who need a ready-to-install light source without separate bulb handling.
Restores original brightness
This unit replaces a lamp that has reached the end of its rated 2000 hours in normal mode or 3000 hours in economy mode. The jump is worth it when image dimming, colour shift or a projector warning indicates the old lamp can no longer deliver reliable output.
Simple housing swap
Because the bulb comes pre-assembled in the housing, installation only requires opening the projector lamp door, removing the old module and sliding the new one into place. The most common issue is forgetting to reset the projector's lamp-hour counter after fitting the replacement.
Highlights
- Ready-to-install module saves setup time
- 165W UHP bulb delivers specified brightness
- 2000 hrs normal mode extends replacement interval
- 3000 hrs economy mode reduces operating cost
- Built to ISO9001 quality standards for reliability
Specifications
| Brand | TOSHIBA |
|---|---|
| Type | UHP |
| Wattage | 165W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which projectors accept the TLPLV2 lamp module?
The TLPLV2 is a complete 165W UHP bulb-and-housing assembly built to fit the Toshiba projectors that originally shipped with this lamp model.
What is the correct way to install the TLPLV2 lamp, and what step do people often skip?
Power off and unplug the projector, let it cool completely, remove the lamp cover, slide the old module out, insert the new TLPLV2 until it seats firmly, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the common mistake.
How many hours can I expect before the TLPLV2 needs replacing?
The 165W UHP lamp is rated for 2000 hours in normal mode or 3000 hours in economy mode; plan a replacement when brightness drops or the projector signals end of life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



