Toshiba
Toshiba TLP-X21J projector lamp 210W
210 W replacement lamp module with housing for easy installation in compatible Toshiba projectors, rated for 1,000 hours of use
- TypeProjector Lamp
- Wattage210W
- Lamp Life1,000 Hrs.
- Genuine 210 W NSH bulb for reliable brightness
- Ready-to-install housing eliminates assembly hassle
- 1 000-hour rated life reduces replacement frequency
- ISO 9001 manufacturing ensures consistent quality
- Direct OEM sourcing from Philips Osram Ushio Phoenix Iwasaki Matsushita
Genuine OEM projector lamp module
The Toshiba TLP-X21J is a complete 210W lamp assembly with housing, built to ISO9001 standards using bulbs from manufacturers such as Philips, Osram or Ushio. It arrives ready for direct installation in compatible Toshiba projectors without additional tools.
Replaces a dimmed or expired original lamp
When image brightness drops or the projector signals end-of-life, this module restores factory light output. The upgrade is worthwhile once the original lamp reaches its rated limit or shows colour shift that cleaning cannot fix.
Rated for 1,000 hours of typical use
At the specified 210W the lamp delivers consistent brightness for roughly 1,000 hours before output declines. Heavy daily operation will reach that limit sooner, while occasional use extends the practical interval.
Highlights
- Genuine 210 W NSH bulb for reliable brightness
- Ready-to-install housing eliminates assembly hassle
- 1 000-hour rated life reduces replacement frequency
- ISO 9001 manufacturing ensures consistent quality
- Direct OEM sourcing from Philips Osram Ushio Phoenix Iwasaki Matsushita
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 210W |
| Lamp Life | 1,000 Hrs. |
Questions about this item
Will the TLP-X21J lamp module fit directly into my Toshiba projector without extra brackets?
The lamp ships as a fully assembled bulb and housing matched to the TLP-X21J specification, so it seats in the projector's original lamp compartment with no additional brackets required.
What is the installation step that people most often miss when swapping the TLP-X21J lamp?
After sliding the module in, the retaining screws must be tightened and the lamp-hour counter reset through the projector menu; skipping the reset leaves the old hour count active.
How many hours of use can I expect before the NSH 210W bulb needs replacement?
The lamp is rated for 1000 hours of operation; plan to replace the module once the projector's hour counter approaches that figure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



