Toshiba
Toshiba TLP-X21C projector lamp 210W
210W replacement lamp module with bulb and housing, rated for 1,000 hours of use
- TypeProjector Lamp
- Wattage210W
- Lamp Life1,000 Hrs.
- Genuine NSH 210W bulb delivers reliable brightness
- Pre-assembled housing enables quick tool-free installation
- ISO 9001 manufacturing ensures consistent beam performance
- 1000-hour rated life supports extended projector use
- Multiple OEM and compatible versions suit different budgets
Ready-to-install 210W replacement module
This Toshiba TLP-X21C lamp ships as a complete assembly with the NSH bulb already seated in its housing, so no separate handling of the bare lamp is required. Installation consists of opening the projector’s lamp door, removing the old module, and sliding the new unit into place until it seats firmly.
Simple swap with standard precautions
The procedure follows the projector’s normal lamp-replacement steps and needs only a screwdriver for the door screws; allow the projector to cool fully before starting to avoid burns and thermal stress on the new bulb. Do not touch the glass envelope of the NSH lamp with bare fingers, as skin oils can create hot spots that shorten the rated 1000-hour life.
Verify exact model match before ordering
Confirm that your Toshiba projector lists the TLP-X21C or TLPLX10 as the correct lamp code, because other Toshiba models use different wattages and housings that will not fit or ignite properly. This unit is not for users whose projector requires a different lamp designation or a higher-wattage module.
Highlights
- Genuine NSH 210W bulb delivers reliable brightness
- Pre-assembled housing enables quick tool-free installation
- ISO 9001 manufacturing ensures consistent beam performance
- 1000-hour rated life supports extended projector use
- Multiple OEM and compatible versions suit different budgets
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 210W |
| Lamp Life | 1,000 Hrs. |
Questions about this item
How can I confirm the 210W lamp is running correctly after installation?
The projector should display a stable, bright image immediately. Reset the lamp timer in the projector menu so the 1,000-hour counter starts from zero.
What components arrive in the box and what must I source separately?
The module ships as a complete assembly with the NSH 210W bulb already mounted in its housing. No extra parts are required for installation.
Which of the four TLP-X21C versions should I select?
Three are OEM modules — one from the original bulb maker, one branded Toshiba, and one from another OEM supplier. The fourth is a lower-cost compatible built with genuine OEM parts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



