We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Toshiba TLP-X10 projector lamp module with 210W NSH bulb in housing

Toshiba

Toshiba TLP-X10 projector lamp 210W 1000 hrs

SKU CH-D9E8-G2P12

A complete 210 W projector lamp module rated for 1,000 hours, supplied with housing for direct installation

  • TypeProjector Lamp
  • Wattage210W
  • Lamp Life1,000 Hrs.
  • Genuine 210W NSH bulb delivers reliable brightness
  • 1000-hour rated life supports extended presentations
  • Pre-assembled housing enables quick tool-free installation
  • ISO 9001 manufacturing ensures consistent beam performance
  • OEM-sourced components guarantee projector compatibility

Replacement Lamp for Toshiba TLP-X10

This new 210 W NSH lamp module ships as a complete bulb-and-housing assembly, ready for direct installation in the Toshiba TLP-X10 projector. It is intended for owners who need a genuine-specification replacement when the original lamp reaches end of life. The unit is supplied new and meets ISO 9001 manufacturing standards. Buyers who require a higher-wattage or longer-life lamp for a different projector model cannot use this part.

Rated Output and Service Life

The lamp is rated at 210 watts with a stated service life of 1,000 hours under normal operating conditions. Output stability is maintained through the rated period, after which brightness and colour uniformity will gradually decline. The module uses an NSH bulb type selected for consistent ignition and voltage characteristics. Users who run their projector continuously for extended sessions should plan replacement around the 1,000-hour mark.

Upgrade From Dim or Expired Original Lamp

This module replaces the factory-installed lamp in the Toshiba TLP-X10 when image brightness has faded or the projector indicates a lamp warning. Swapping the complete housing eliminates the alignment issues that can occur with bare-bulb changes. The jump is worthwhile when the existing lamp has exceeded its rated hours or shows visible degradation such as colour shift or hot-spotting. Projectors that require a different lamp code or wattage are not compatible with this replacement.

Highlights

  • Genuine 210W NSH bulb delivers reliable brightness
  • 1000-hour rated life supports extended presentations
  • Pre-assembled housing enables quick tool-free installation
  • ISO 9001 manufacturing ensures consistent beam performance
  • OEM-sourced components guarantee projector compatibility

Specifications

TypeProjector Lamp
Wattage210W
Lamp Life1,000 Hrs.

Questions about this item

How much power does the 210W lamp draw and how much heat does it add during all-day use?

The lamp is rated at 210W, so it will draw roughly that amount and add a comparable heat load to the projector during continuous operation.

What existing Toshiba projector model is required for this TLP-X10 module to fit and work?

This replacement module is built for the Toshiba TLP-X10 projector; it includes the bulb and housing assembled for direct installation in that model.

Will the 1,000-hour lamp life be affected if I keep using the same projector chassis and filters?

The rated 1,000-hour life assumes a properly maintained chassis; clean filters and unobstructed vents help the lamp reach its full rated hours.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.