Toshiba
Toshiba TLP-T620 projector lamp 190W
Genuine compatible replacement lamp module with 190W UHM bulb and housing, rated for 2000 hours normal or 3000 hours economy use
- TypeProjector Lamp
- Wattage190W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Genuine replacement lamp ready for immediate installation
- 190W UHM bulb delivers consistent brightness
- 2,000 hours normal use or 3,000 hours economy mode
- Manufactured to ISO 9001 quality standards
- Fully assembled housing eliminates separate bulb fitting
Genuine replacement lamp for Toshiba projectors
This 190W module combines a new UHM bulb with its housing so it fits directly into compatible Toshiba projectors without extra assembly. It is intended for owners who need a ready-to-install light source when the original lamp reaches end of life.
Assembled bulb and housing built to ISO 9001 checks
The unit arrives fully assembled, eliminating the handling of a bare bulb during installation. Each lamp undergoes beam, ignition, voltage and run-time verification before shipping, so the projector powers up reliably from the first use.
190W UHM lamp rated 2,000 hours normal
Brightness and lamp life follow the projector's selected mode; the higher-output setting gives 2,000 hours while the lower-power economy setting extends to 3,000 hours. The fixed 190W rating means the lamp cannot be swapped for a different wattage without changing the projector's power design.
Highlights
- Genuine replacement lamp ready for immediate installation
- 190W UHM bulb delivers consistent brightness
- 2,000 hours normal use or 3,000 hours economy mode
- Manufactured to ISO 9001 quality standards
- Fully assembled housing eliminates separate bulb fitting
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 190W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What projector models does the TLP-T620 lamp module fit?
The module is built for Toshiba projectors that use the TLP-T620 lamp assembly, also referenced as TLPLW2, and arrives as a complete bulb-and-housing unit for direct replacement.
What clearance or housing dimensions must the projector bay provide?
The lamp ships as a fully assembled housing that matches the original form factor, so the projector's existing lamp compartment accepts it without modification.
How is the lamp installed, and what step do people often miss?
Power off and cool the projector, open the lamp door, release the retaining screws, swap the complete module, re-tighten the screws, close the door, then reset the lamp-hour counter in the menu so the 2,000- or 3,000-hour rating tracks correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



