Toshiba
Toshiba TLP-S60U Projector Lamp 165W 2000/3000 Hrs
New UHP 165W lamp module with housing fits Toshiba projectors, rated 2,000 normal or 3,000 economy hours
- TypeUHP
- Wattage165W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- OEM replacement lamp fits Toshiba projectors directly
- 165W UHP bulb delivers bright, consistent output
- 2000 hours normal mode extends usable life
- 3000 hours economy mode reduces replacement frequency
- ISO 9001 manufacturing ensures reliable ignition and run-time
Toshiba TLP-S60U replacement lamp
The Toshiba TLP-S60U is a new 165W UHP projector lamp module supplied with the bulb pre-fitted in its housing. It is designed for owners of compatible Toshiba projectors who need a direct replacement that installs without extra assembly. The unit uses an OEM-grade bulb built to ISO9001 quality standards and is ready to use on arrival.
Suitable for standard and economy use
This lamp suits users who run their projector in normal mode and expect about 2000 hours of life, or who prefer economy mode to reach approximately 3000 hours. It is not intended for buyers who need a bare bulb without the housing, nor for installations that require a different wattage or lamp type than the specified 165W UHP.
165W UHP lamp type and rated hours
The decisive specification is the 165W UHP lamp delivering 2000 hours in normal mode and 3000 hours in economy mode. Match this wattage and lamp type to your projector's requirements to confirm the correct fit.
Highlights
- OEM replacement lamp fits Toshiba projectors directly
- 165W UHP bulb delivers bright, consistent output
- 2000 hours normal mode extends usable life
- 3000 hours economy mode reduces replacement frequency
- ISO 9001 manufacturing ensures reliable ignition and run-time
Specifications
| Brand | TOSHIBA |
|---|---|
| Type | UHP |
| Wattage | 165W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Does the TLP-S60U lamp module include the housing so it fits directly into the projector?
Yes, the module is supplied as a fully assembled 165W bulb and housing ready for direct installation.
What is the correct sequence for installing the TLP-S60U lamp to avoid errors?
Power off and unplug the projector, allow it to cool, remove the lamp cover, release the securing screws, pull out the old module, insert the new one until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu.
How many hours can I expect before the 165W UHP lamp needs replacement?
The lamp is rated for 2,000 hours in normal mode or 3,000 hours in economy mode before replacement is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



