Toshiba
Toshiba TLP-S40 projector lamp 165W UHP 2000/3000 hrs
Replacement projector lamp module with 165 W UHP bulb rated for 2000 to 3000 hours
- TypeUHP
- Wattage165W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with bulb and housing
- 165 W UHP lamp delivers bright projection
- 2 000 hours normal mode lamp life
- 3 000 hours economy mode extends use
- Manufactured to ISO 9001 quality standards
Genuine Replacement Lamp Module
The Toshiba TLP-S40 module ships as a complete 165 W UHP bulb inside its original housing, so it fits the projector without extra assembly. Installation takes seconds because the unit arrives fully assembled and aligned at the factory. Each lamp is tested for ignition, voltage and beam performance before it leaves the supplier. The result is a drop-in part that restores factory brightness immediately.
Ideal for TLP-S40 Owners Seeking OEM Quality
This lamp suits anyone who wants the same light output and colour balance the projector delivered when new. It is not for buyers who need a bare bulb without the housing, nor for technicians looking to service a different projector chassis. Users who prefer a lower-cost compatible module without the original manufacturer's quality checks should consider other listings.
165 Watt UHP Lamp With Dual-Mode Life
The 165 W UHP lamp is rated for 2,000 hours in normal mode and 3,000 hours in economy mode, giving a clear maintenance interval. No other wattage or lamp type fits this housing, so the 165 W figure is the single specification that confirms compatibility. Always select the matching power setting in the projector menu to reach the stated lifetime.
Highlights
- Ready-to-install module with bulb and housing
- 165 W UHP lamp delivers bright projection
- 2 000 hours normal mode lamp life
- 3 000 hours economy mode extends use
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | TOSHIBA |
|---|---|
| Type | UHP |
| Wattage | 165W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
How do I install the TLP-S40 lamp module and what step is often missed?
Power off and unplug the projector, wait for it to cool completely, remove the lamp cover, loosen the securing screws, slide out the old module, insert the new housing until it seats firmly, retighten the screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the step most people miss.
What maintenance will this 165 W UHP lamp need later?
No routine maintenance is required; when brightness drops after 2000 hours in normal mode or 3000 hours in economy mode, replace the entire module.
What limit appears first during long sessions with this lamp?
The 165 watt UHP bulb reaches its rated thermal output first, so the projector’s cooling fan will run at high speed and the unit may enter thermal protection if ventilation is restricted.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


