Toshiba
Toshiba TLP-B2U Genuine Compatible projector lamp 120W 2000 Hrs
Genuine compatible 120 W replacement lamp module with 2,000-hour rated life for Toshiba projectors
- TypeProjector Lamp
- Wattage120W
- Lamp Life2,000 Hrs.
- Ready-to-install module saves setup time
- 120W UHP bulb matches original brightness
- 2,000-hour rated life extends replacement interval
- ISO 9001 manufacturing ensures consistent quality
- Genuine compatible option fits budget and performance needs
Genuine Compatible Projector Lamp 120W
The Toshiba TLP-B2U module delivers a 120W UHP bulb pre-fitted in its housing for direct installation. It is intended for owners of compatible Toshiba projectors who need a new light source without separate bulb handling. The lamp is rated for 2000 hours of operation.
Replaces Worn Original Lamp Module
This unit substitutes the factory lamp when brightness has faded or the projector signals a replacement. The jump is worth it when image quality has dropped below usable levels and a complete module swap is preferred over bare-bulb replacement. Each version ships ready to fit.
Check Projector Model Compatibility First
Verify that your Toshiba projector accepts the TLP-B2U designation before ordering. Confirm the lamp compartment matches the supplied housing dimensions and connector layout. Ensure the projector’s lamp-hour counter can be reset after installation to track the new 2000-hour rating.
Highlights
- Ready-to-install module saves setup time
- 120W UHP bulb matches original brightness
- 2,000-hour rated life extends replacement interval
- ISO 9001 manufacturing ensures consistent quality
- Genuine compatible option fits budget and performance needs
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 120W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
What projector models does the TLP-B2U lamp module fit?
The module is built for Toshiba projectors that use the TLP-B2U (TLPLB2) lamp code, so it matches the original housing and connector for those models.
How do I install the TLP-B2U lamp, and what step is often missed?
Power off and unplug the projector, let it cool, open the lamp door, remove the old module, insert the new TLP-B2U unit until it seats firmly, close the door, then reset the lamp-hour counter in the menu — skipping the reset is the common mistake.
When will the 120 W UHP bulb need replacement?
The lamp is rated for 2,000 hours of typical use; after that brightness drops and the projector will usually prompt for a new module.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



