Toshiba
Toshiba TLP-B2SU projector lamp 120W 2000 Hrs
120 W UHP projector lamp module with 2,000-hour rated life, supplied as a complete housing for direct installation
- TypeUHP
- Wattage120W
- Lamp Life2,000 Hrs.
- Ready to install with bulb and housing assembled
- 120W UHP lamp delivers 2000 hours of operation
- Manufactured to ISO 9001 quality standards
- Multiple OEM and compatible versions available
- Tested for beam performance ignition voltage and run-time
Toshiba TLP-B2SU 120W projector lamp
This replacement lamp module fits Toshiba projectors requiring the TLP-B2SU part. It ships as a fully assembled bulb and housing so it can be installed without extra tools. The unit is designed for users who need a direct swap when the original lamp reaches end of life. It is not intended for projectors that use a different lamp code or wattage.
Pre-assembled housing with OEM-grade UHP bulb
The lamp arrives as a complete module, eliminating the need to handle a bare bulb or align a separate reflector. Each version is built to ISO 9001 standards and checked for beam performance, ignition voltage, connections and run-time. The housing locks into the projector’s existing lamp compartment using the original mounting points. No wiring adapters or firmware updates are required for installation.
120W UHP lamp rated for 2,000 hours
The 120W ultra-high-pressure bulb delivers the specified brightness for the projector’s optical engine. Typical operating heat and fan noise match the original lamp’s profile because the power draw is identical. Rated life is 2,000 hours under normal use; actual hours vary with power-on cycles and eco-mode settings. The lamp is not suited for users who need a longer-rated module or a different wattage.
Highlights
- Ready to install with bulb and housing assembled
- 120W UHP lamp delivers 2000 hours of operation
- Manufactured to ISO 9001 quality standards
- Multiple OEM and compatible versions available
- Tested for beam performance ignition voltage and run-time
Specifications
| Brand | TOSHIBA |
|---|---|
| Type | UHP |
| Wattage | 120W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
What wattage does the TLP-B2SU lamp draw and what lamp life is rated?
The module uses a 120W UHP bulb rated for 2,000 hours of operation.
Does the TLP-B2SU arrive as a complete housing or bare bulb?
It ships as a fully assembled bulb-and-housing module, ready to slot into the projector.
What is the first step when installing the TLP-B2SU and what do users often skip?
Power off and unplug the projector, let it cool completely, then remove the lamp cover; users often forget the cooling wait.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



