Toshiba
Toshiba TLP-670 Projector Lamp 150W 2000 Hrs
Replacement lamp module for TLP-670 projectors with 150W UHP bulb and housing, rated for 2000 hours
- TypeProjector Lamp
- Wattage150W
- Lamp Life2,000 Hrs.
- Ready-to-install module saves setup time
- 150W UHP bulb matches original brightness spec
- 2000-hour rated life reduces replacement frequency
- ISO 9001 manufacturing ensures consistent quality
- Genuine compatible housing fits Toshiba TLP-670 projectors
Genuine 150 W replacement lamp
The Toshiba TLP-670 module supplies a new 150 W UHP bulb inside a complete housing, ready for direct installation in compatible Toshiba projectors. It restores original brightness and colour accuracy for home-cinema, classroom or meeting-room use.
Upgrade from a dimming or expired 2 000-hour lamp
Replace the old module when image brightness drops, colour fidelity fades or the projector warns that lamp life has ended. The jump is worth it whenever the current lamp no longer delivers a clear, vibrant picture.
Simple housing swap with no tools
The pre-assembled bulb and housing unit slides into the projector lamp compartment and locks in place, so installation takes minutes. The only common issue is forgetting to reset the lamp-hour counter in the projector menu after fitting the new module.
Highlights
- Ready-to-install module saves setup time
- 150W UHP bulb matches original brightness spec
- 2000-hour rated life reduces replacement frequency
- ISO 9001 manufacturing ensures consistent quality
- Genuine compatible housing fits Toshiba TLP-670 projectors
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 150W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which Toshiba projectors accept the TLP-670 lamp module?
The TLP-670 lamp module is designed for Toshiba projectors that use the TLPL6 lamp code; check your projector manual to confirm it lists TLP-670 or TLPL6 as the correct replacement.
How do I install the TLP-670 lamp, and what step is often missed?
Power off and unplug the projector, let it cool completely, remove the lamp cover, release the retaining screws, slide out the old module, insert the new TLP-670 assembly until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most people forget.
When will the TLP-670 lamp need replacement, and what should I do?
The lamp is rated for 2000 hours of use; when brightness drops or the projector warns that the lamp is near end of life, purchase a new TLP-670 module and repeat the installation steps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


