Toshiba
Toshiba TLP-661E projector lamp 150W 2000 hrs
Replacement projector lamp module with a 150W UHP bulb rated for 2000 hours of use
- TypeUHP
- Wattage150W
- Lamp Life2,000 Hrs.
- Ready to install with pre-assembled housing
- Bright 150W UHP lamp for clear projection
- Rated 2000 hours of reliable operation
- Manufactured to ISO 9001 quality standards
- Genuine OEM bulb from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
Direct-fit replacement for Toshiba projectors
The TLP-661E module delivers a new 150W UHP bulb inside a pre-assembled housing. It is designed for owners of compatible Toshiba projectors who need a ready-to-install light source without separate bulb handling.
UHP lamps dim gradually over their rated 2000-hour
Brightness and colour stability decline as the bulb ages, so image quality will not remain constant for the full period. The 150W power draw also fixes the heat output, requiring the projector's original cooling system to manage that thermal load.
Pre-assembled housing enables tool-free lamp swap
The unit seats directly into the projector's lamp bay, eliminating alignment of a bare burner. The common mistake is neglecting to reset the projector's hour counter after fitting the new module, which leaves the replacement timer inaccurate.
Highlights
- Ready to install with pre-assembled housing
- Bright 150W UHP lamp for clear projection
- Rated 2000 hours of reliable operation
- Manufactured to ISO 9001 quality standards
- Genuine OEM bulb from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
Specifications
| Brand | TOSHIBA |
|---|---|
| Type | UHP |
| Wattage | 150W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which TLP-661E version should I choose among the OEM and compatible options?
The listing offers three OEM versions — from the original bulb maker, from Toshiba, and from another OEM maker — plus a compatible version built with genuine OEM parts; all meet ISO 9001 quality checks for beam performance, ignition, voltage and run-time.
What does the 150 W rating mean once the lamp is installed in my projector?
It indicates the lamp draws 150 W of power during operation, matching the original specification so brightness and thermal load stay as designed for the projector.
What interface or standard governs the lamp, and what does it cap in practice?
The lamp is built to ISO 9001 manufacturing standards, which cap quality variation by enforcing strict checks on beam performance, ignition, voltage, appearance, connections and run-time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



