Toshiba
Toshiba TDP-TW90 projector lamp 200W
A 200 W replacement lamp module with a new Philips UHP bulb in a ready-to-fit housing, rated 2,000 hours normal or 3,000 hours economy
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- New 200W UHP lamp restores full projector brightness
- Ready-to-install housing with bulb saves replacement time
- 2,000 hours normal or 3,000 hours economy lamp life
- Manufactured to ISO 9001 quality standards for reliable operation
- Genuine Philips 200W bulb ensures correct ignition and voltage
Replacement lamp for Toshiba TDP-TW90
This 200W UHP lamp module arrives fully assembled with housing for direct installation in the Toshiba TDP-TW90 projector. It is intended for owners who need a new light source after the original lamp reaches end of life. Buyers who require a lamp for a different projector model cannot use this module.
Thermals noise and power draw
The lamp operates at 200W and is rated for 2,000 hours in normal mode or 3,000 hours in economy mode. Economy mode reduces power consumption and heat output, which also lowers fan noise during operation. No separate cooling specifications or acoustic figures are provided for the module itself.
Bundled housing and quality checks
The pre-assembled housing eliminates the need to handle the bare bulb and speeds up replacement. Each unit undergoes ISO9001 quality checks covering beam performance, ignition, voltage, appearance, connections and run-time. An 180-day warranty and 30-day return window are included with the purchase.
Highlights
- New 200W UHP lamp restores full projector brightness
- Ready-to-install housing with bulb saves replacement time
- 2,000 hours normal or 3,000 hours economy lamp life
- Manufactured to ISO 9001 quality standards for reliable operation
- Genuine Philips 200W bulb ensures correct ignition and voltage
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 200W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
How do I install the TLPLW3 lamp module and what step is often missed?
The TLPLW3 ships as a fully assembled 200W bulb and housing; power off the projector, let it cool, remove the old module, insert the new one until it seats firmly, then reset the lamp-hour counter in the menu — skipping the counter reset is the step most people forget.
What maintenance or replacement will the TLPLW3 need later?
The 200W UHP bulb is rated for 2000 hours in normal mode or 3000 hours in economy mode; after that the lamp must be replaced again — no other user-serviceable parts exist inside the module.
What limit appears first during sustained use of the TLPLW3?
The 2000-hour normal-mode rating (or 3000 hours in economy) is the first hard limit; once reached, brightness drops and the projector will prompt for a new lamp.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



