Toshiba
Toshiba TDP-ST20 TLPLW15 275W Projector Lamp
A ready-to-install 275W replacement lamp module rated for 2,000 normal or 3,000 economy hours
- TypeProjector Lamp
- Wattage275W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with bulb and housing
- 275W SHP lamp delivers specified brightness
- 2,000 hours normal-mode lamp life
- 3,000 hours economy-mode lamp life
- Built to ISO 9001 quality standards
Replacement lamp for Toshiba TDP-ST20
This 275W projector lamp module ships as a fully assembled bulb and housing. It is built as a direct replacement for the Toshiba TLPLW15 model and arrives ready to install without extra assembly steps.
Suitable for owners needing a factory-spec spare
Users who require a different wattage or a bare bulb without housing should look at other options. The module is offered in several OEM and compatible versions, so buyers who need a specific manufacturer source must verify the version before ordering.
Simple swap-in installation
The complete housing allows a straightforward changeover by opening the projector lamp door and seating the module. Common issues include forgetting to reset the lamp-hour counter after fitting the new unit or not seating the connector firmly, which can prevent ignition.
Highlights
- Ready-to-install module with bulb and housing
- 275W SHP lamp delivers specified brightness
- 2,000 hours normal-mode lamp life
- 3,000 hours economy-mode lamp life
- Built to ISO 9001 quality standards
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 275W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which Toshiba projector models accept the TDP-ST20 lamp module with TLPLW15 designation?
The TDP-ST20 lamp module carries Toshiba part number TLPLW15 and is built as a direct replacement for projectors that specify this exact model code.
Can I keep using my existing ceiling mount and cables when swapping in this 275W lamp?
Yes, the lamp ships as a complete bulb-and-housing assembly that fits the original lamp cavity, so the projector's mount, power cord and signal cables remain unchanged.
How do I verify the new lamp is operating correctly after installation?
Reset the projector's lamp-hour counter, then confirm the menu reports 0 hours and that the lamp runs for the rated 2,000 normal or 3,000 economy hours without premature dimming or shutdown.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



