Toshiba
Toshiba TDP-S81 projector lamp 200W Philips UHP
Replacement lamp module with a 200 W Philips UHP bulb and housing, rated 2 000 hours normal or 3 000 hours economy
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready to install with pre-assembled housing
- 200 W Philips UHP bulb delivers bright output
- 2 000 hours normal mode lamp life
- 3 000 hours economy mode extends usage
- Manufactured to ISO 9001 quality standards
Replacement Lamp for TDP-S81 Projectors
This new 200W lamp module uses a Philips UHP bulb inside a complete housing. It is built for owners of Toshiba TDP-S81 projectors who need a direct replacement when the original lamp reaches end of life. The unit arrives fully assembled so no separate bulb handling is required.
Installing the Pre-Assembled Module
Because the bulb is already seated in its housing, installation only involves opening the projector lamp door, removing the old module and sliding the new one into place. The most common issue is forgetting to reset the projector lamp-hour counter after fitting the unit, which can cause premature replacement warnings.
Output Over Extended Use
In normal mode the lamp is rated for 2,000 hours and in economy mode for 3,000 hours. Brightness will gradually decline across that span rather than dropping sharply in the first few hundred hours. Running the projector in economy mode reduces thermal stress and extends the usable interval between replacements.
Highlights
- Ready to install with pre-assembled housing
- 200 W Philips UHP bulb delivers bright output
- 2 000 hours normal mode lamp life
- 3 000 hours economy mode extends usage
- Manufactured to ISO 9001 quality standards
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 200W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
How can I confirm the TDP-S81 lamp is operating correctly after installation?
Check the projector menu for the lamp hour counter; it should read near zero and increase steadily during use, with brightness matching the 200W Philips UHP specification.
What comes in the box and what must I purchase separately for the TDP-S81 lamp?
The module includes a fully assembled 200W Philips UHP bulb inside its housing, ready to install; no extra parts or tools are required.
Which TDP-S81 version should I choose between the OEM and compatible options?
Three OEM versions use genuine Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita bulbs built to ISO9001 standards; the compatible version uses genuine OEM parts from a leading third-party maker at a lower cost.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



