Toshiba
Toshiba TDP-S25 Projector Lamp 180W
A 180 W projector lamp module with a 2,000 to 3,000 hour rated life, supplied as a complete housing for direct installation
- TypeProjector Lamp
- Wattage180W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- 180W UHP bulb delivers bright projection
- Ready-to-install housing saves setup time
- 2,000 normal / 3,000 economy hours lamp life
- ISO 9001 quality checks ensure reliable performance
- Genuine compatible replacement for Toshiba TDP-S25
Genuine Replacement Lamp for TDP-S25 Projectors
This 180W UHP lamp module arrives fully assembled with housing for direct installation in Toshiba TDP-S25 projectors. It restores original brightness and colour performance for business presentations or classroom use.
OEM-Grade Build with Verified Quality Checks
Each unit is manufactured to ISO9001 standards and tested for beam performance, ignition voltage, connections and run-time before dispatch. The pre-fitted housing eliminates alignment hassle and reduces downtime during lamp swaps.
180W UHP Bulb Delivering 2,000 to 3,000 Hours
Rated life reaches 2,000 hours in normal mode and extends to 3,000 hours in economy mode, determining how often the module must be replaced. Buyers needing longer intervals between changes should consider models with higher rated hours.
Highlights
- 180W UHP bulb delivers bright projection
- Ready-to-install housing saves setup time
- 2,000 normal / 3,000 economy hours lamp life
- ISO 9001 quality checks ensure reliable performance
- Genuine compatible replacement for Toshiba TDP-S25
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 180W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What is the wattage of the UHP lamp in this TDP-S25 module and how does it affect brightness?
The module uses a 180W UHP lamp; wattage determines the light output the projector can produce, so this rating matches the original specification for correct brightness.
What physical components are included so the lamp fits the projector without extra parts?
The unit ships as a fully assembled bulb and housing, meaning the complete module slots directly into the projector without needing to reuse the old cage.
How is the lamp installed and which step do users often miss?
Power off and cool the projector, remove the lamp cover, release the retaining screws, slide the old module out, insert the new one until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the most common oversight.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



