Toshiba
Toshiba TDP-LMT20 200W projector lamp
200 W projector lamp module with assembled bulb and housing, rated for 2,000 hours of operation
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 Hrs.
- Ready-to-install module with bulb and housing
- 200 W P-VIP lamp delivers specified brightness
- Rated 2,000 hours of projection time
- OEM-grade build from Phoenix, Philips, Osram, Ushio, Iwasaki or Matsushita
- ISO 9001 quality checks on beam, ignition, voltage and run-time
Toshiba TDP-LMT20 200W lamp
This Toshiba TDP-LMT20 module supplies a 200W P-VIP bulb inside a complete housing. It is built for owners of compatible Toshiba projectors who need a direct replacement that installs without extra assembly. The lamp is rated for 2,000 hours of operation.
Replaces a worn original lamp
When the existing lamp dims or reaches its rated life, this module restores full brightness with a new 200W bulb. The jump is worth it if the projector image has faded or the lamp-hour counter shows the end of the 2,000-hour window. No other components are changed.
Suits Toshiba projector owners
This unit suits users who want a ready-to-fit 200W replacement for the TDP-LMT20 designation. Buyers who need a different wattage, a bare bulb without housing, or a lamp for another projector model should look at something else.
Highlights
- Ready-to-install module with bulb and housing
- 200 W P-VIP lamp delivers specified brightness
- Rated 2,000 hours of projection time
- OEM-grade build from Phoenix, Philips, Osram, Ushio, Iwasaki or Matsushita
- ISO 9001 quality checks on beam, ignition, voltage and run-time
Specifications
| Type | Projector Lamp |
|---|---|
| Wattage | 200W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which Toshiba projector models accept the TDP-LMT20 200W lamp module?
The TDP-LMT20 is a direct replacement module for Toshiba projectors that specify this part number; check your projector manual to confirm the exact model compatibility before purchase.
What is the correct procedure to install the TDP-LMT20 lamp and which step is most often missed?
Power off and unplug the projector, allow it to cool completely, remove the lamp cover, swap the old module for the new TDP-LMT20, secure the cover, then reset the lamp timer in the menu — the timer reset is the step users frequently forget.
When should I plan to replace the Phoenix P-VIP 200W bulb inside the TDP-LMT20 housing?
The lamp is rated for 2000 hours of typical use; replace it when brightness drops noticeably or the projector displays a lamp-warning message.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



