We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New Toshiba TDP-D1 projector lamp module with Philips 250W UHP bulb in black housing

Toshiba

Toshiba TDP-D1 OEM Philips Projector Lamp 250W 2000 Hrs

SKU CH-6YG3-RCZFR

A ready-to-install 250 W replacement lamp module with a genuine Philips UHP bulb rated for 2,000 hours

  • TypeProjector Lamp
  • Wattage250W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module with genuine Philips UHP 250W bulb
  • 2,000-hour rated lamp life for extended projector use
  • OEM replacement matches original Toshiba 60.J5016.CB1 specification
  • Manufactured to ISO 9001 quality standards with strict performance testing
  • Available in multiple OEM versions from Philips, Osram, Ushio and others

Ready-to-install 250 W lamp module

This projector lamp module arrives fully assembled with a new Philips UHP 250 W bulb inside its housing. It is a direct replacement for the Toshiba TDP-D1 (model 60.J5016.CB1) and is ready to install without extra tools or alignment steps. The unit is manufactured to ISO 9001 quality standards and tested for beam performance, ignition voltage and run-time before it ships.

Replaces a dim or expired original lamp

Swap this module in when the existing lamp reaches its 2 000-hour rated life or when brightness drops below usable levels. The OEM Philips bulb restores the projector’s original light output and colour balance, so the upgrade is worthwhile whenever the current lamp no longer meets the required image quality. Buyers who need a higher-wattage or longer-life alternative will not find those specifications in this module.

Verify the exact projector model first

Confirm that your Toshiba projector uses the TDP-D1 lamp assembly (part 60.J5016.CB1) before ordering, because several similar-looking modules exist for other models. Check the projector’s lamp-hour counter or on-screen menu to ensure the existing lamp is due for replacement. Ensure the projector is powered off and cooled down before starting the installation.

Highlights

  • Ready-to-install module with genuine Philips UHP 250W bulb
  • 2,000-hour rated lamp life for extended projector use
  • OEM replacement matches original Toshiba 60.J5016.CB1 specification
  • Manufactured to ISO 9001 quality standards with strict performance testing
  • Available in multiple OEM versions from Philips, Osram, Ushio and others

Specifications

TypeProjector Lamp
Wattage250W
Lamp Life2,000 Hrs.

Questions about this item

Which Toshiba projector models accept the TDP-D1 lamp module with part number 60.J5016.CB1?

The module is built for Toshiba projectors that use the TDP-D1 lamp, identified by part number 60.J5016.CB1.

What is the correct way to seat the pre-assembled bulb and housing during installation?

Power off and cool the projector, remove the lamp cover, slide the complete module into the compartment until the connector engages, then secure the retaining screws before replacing the cover.

How many hours of use can I expect from the 250 W Philips UHP bulb before replacement?

The lamp is rated for 2,000 hours of operation at 250 watts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.