We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular industrial barcode printer, matte grey finish, front media window, top control panel

Toshiba

Toshiba B-EX4T2 BEX4D2GS12M01 barcode printer 200 dpi 12 ips

SKU CH-G61S-W593X MPN BEX4D2GS12M01

Direct thermal industrial printer producing 200 dpi labels at 12 ips with cutter, peel-off, rewinder and USB 2.0 plus Ethernet

  • Print TechnologyDirect Thermal
  • Printer TypeIndustrial
  • Print Speed12 ips
  • Max Resolution(B&W)200 dpi
  • Fonts IncludedBitmap and outline
  • Barcode TypeIncludes GS1 DataBar (RSS) compatibles
  • Direct thermal printing requires no ribbon supplies
  • 200 dpi resolution produces sharp barcode labels
  • 12 ips print speed handles high-volume output
  • USB 2.0 and Ethernet interfaces enable network integration
  • Cutter, peel-off and internal rewinder streamline label handling

Industrial direct-thermal barcode printer

The Toshiba B-EX4T2 BEX4D2GS12M01 is an industrial direct-thermal barcode printer built for continuous label production. It prints at 12 inches per second with a 200 dpi resolution and includes a cutter, peel-off and internal rewinder. Standard interfaces are USB 2.0 and Ethernet, with optional parallel, serial and wireless LAN modules available.

Suited for high-volume shipping

Operations that need fast, linerless or die-cut labels up to 114 mm wide on 200 mm rolls will benefit from the flat-type printhead and SNMP network management. Environments requiring thermal-transfer ribbon printing, colour output or media wider than 114 mm should consider alternative technologies.

Handles large roll capacities

The printer accommodates standard ribbon lengths of 450 m and 600 m, reducing change-over frequency during extended runs. Throughput is capped at the 12 ips print speed and 200 dpi resolution, so very fine graphics or ultra-high-density barcodes may exceed the printhead capability.

Highlights

  • Direct thermal printing requires no ribbon supplies
  • 200 dpi resolution produces sharp barcode labels
  • 12 ips print speed handles high-volume output
  • USB 2.0 and Ethernet interfaces enable network integration
  • Cutter, peel-off and internal rewinder streamline label handling

Specifications

BrandToshiba
SeriesB-EX4T2
ModelBEX4D2GS12M01
Print TechnologyDirect Thermal
Printer TypeIndustrial
Print Speed12 ips
Max Resolution(B&W)200 dpi
Fonts IncludedBitmap and outline
Barcode TypeIncludes GS1 DataBar (RSS) compatibles
CutterCutter, peel-off & internal rewinder
Media sizes supportedPaper Width: 114 mm
Paper Alignment: Left
Paper Roll Diameter: 200 mm
Std. Ribbon Lengths: 450m, 600m
InterfaceUSB 2.0, Ethernet
FeaturesPrinthead: Flat-type
Optional Interface: Parallel, serial, wireless LAN, RTC & USB host
Network Tool: SNMP
Dimensions12.20" x 10.94" x 18.11"
Shipping weight18.14 kg
Package size511 × 361 × 328 mm

Questions about this item

What media width and roll diameter must I have on hand to load this printer?

The unit accepts paper up to 114 mm wide and rolls up to 200 mm in diameter.

Will my existing parallel or serial cable work if I add the optional interface card?

Yes, the optional interface slot supports parallel and serial connections alongside wireless LAN, RTC and USB host.

How can I verify the flat-type printhead is operating correctly after installation?

Print a test label via USB 2.0 or Ethernet and check that barcodes including GS1 DataBar render cleanly at 200 dpi.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.