We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tan plastic electronic timer with digital display and DIN rail mounting clips

Tork

Tork DIN200B Electronic Timer 120VAC electrical box

SKU CH-E543-F0XTX

24-hour electronic timer with two channels and 14 programmable events, SPDT contacts rated 16 A at 120 V AC, surface or DIN-rail mountable in a tan plastic enclosure with CR2032 battery backup

  • TypeWire-In / Outlet Modules
  • 24-hour scheduling with 14 programmable events
  • Two independent channels for separate circuit control
  • 16 A SPDT contacts handle 120 V AC loads
  • Battery backup retains settings during power loss
  • Surface or DIN-rail mounting fits standard enclosures

Tork DIN200B 120V Electronic Timer

The Tork DIN200B is a wire-in electronic timer that runs on 120V AC and provides two independent SPDT channels. It fits surface or DIN-rail mounting inside a plastic enclosure coloured tan.

Two-channel scheduling with battery backup

This timer suits installers who need up to 14 on/off events across two channels with a minimum setting of 1 minute and a maximum of 24 hours. It is not for systems requiring more than two channels or contact ratings above 16 amps.

Sustained operation within 14 to 113 degrees F

Under continuous load the unit maintains timing accuracy while the two CR2032 lithium cells preserve schedules during power loss. The plastic housing and 1-pole design remain stable across the stated temperature range.

Highlights

  • 24-hour scheduling with 14 programmable events
  • Two independent channels for separate circuit control
  • 16 A SPDT contacts handle 120 V AC loads
  • Battery backup retains settings during power loss
  • Surface or DIN-rail mounting fits standard enclosures

Specifications

BrandTORK
TypeWire-In / Outlet Modules

Questions about this item

What voltage supply and mounting options does the Tork DIN200B timer need to operate?

It requires a 120V AC supply and can be mounted on a surface or DIN rail.

Will the timer's 16 A SPDT contacts control my existing 120V lighting or motor loads directly?

Yes, the single-pole double-throw contacts are rated for 16 A at 120V AC for direct load switching.

How can I confirm the timer is keeping time and executing its 14 on/off events after installation?

The 1/4-inch display shows the current time and active events so you can verify operation visually.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.