TOPOWER
TOPOWER TOP-700WB1 700 W power supply
700 W ATX power supply with 80 PLUS Bronze efficiency, active PFC, a 140 mm fan and eight SATA connectors
- TypeATX 12V / EPS 12V
- Maximum Power700 W
- Fans1 x 140 mm
- PFCActive
- Main Connector20+4 Pin
- PCI-Express Connector1 x 6 Pin, 2 x 6+2 Pin
- Delivers 700 W continuous power for demanding builds
- 80 PLUS Bronze certification reduces wasted energy and heat
- Active PFC corrects power factor across 100–240 V input
- 140 mm fan moves air quietly at lower speeds
- 160 mm depth fits most standard ATX cases
Capacity and certification
The TOPOWER TOP-700WB1 delivers 700 W of continuous power through an ATX12V and EPS12V design. It carries 80 PLUS Bronze certification and uses Active PFC across a 100-240 V input range. The unit suits mid-range gaming PCs and workstation builds that need reliable output without modular cables.
Connector and clearance check
Verify that your motherboard accepts a 20+4 pin main connector and that the graphics card requires no more than one 6 pin and two 6+2 pin PCIe leads. Eight SATA power plugs are provided for drives and peripherals. The power supply measures 160 mm in depth, so confirm the case allows at least that length.
Non-modular upgrade path
This model replaces older non-modular units that lack 80 PLUS Bronze efficiency or sufficient PCIe connectors for dual-card SLI and CrossFire setups. The jump is worthwhile when moving from a lower-wattage design that cannot sustain 700 W or lacks Active PFC and Haswell-ready standby support.
Highlights
- Delivers 700 W continuous power for demanding builds
- 80 PLUS Bronze certification reduces wasted energy and heat
- Active PFC corrects power factor across 100–240 V input
- 140 mm fan moves air quietly at lower speeds
- 160 mm depth fits most standard ATX cases
Specifications
| Brand | TOPOWER |
|---|---|
| Series | BRONZE |
| Model | TOP-700WB1 |
| Type | ATX 12V / EPS 12V |
| Maximum Power | 700 W |
| Fans | 1 x 140 mm |
| PFC | Active |
| Main Connector | 20+4 Pin |
| PCI-Express Connector | 1 x 6 Pin, 2 x 6+2 Pin |
| SATA Power Connector | 8 |
| SLI | Ready |
| Haswell Support | Ready |
| CrossFire | Ready |
| Max PSU Length | 160 mm |
| Modular | No |
| Energy-Efficient | 80 PLUS BRONZE Certified |
| Over Voltage Protection | Yes |
| Overload Protection | Yes |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 47 - 63 Hz |
| Power Rating | 700W |
| Dimensions | 150 x 160 x 86 MM |
| Frequency Range | 47 - 63 Hz |
| Floppy Connector | 1 |
| Peripheral Connector | 8 |
| Fans Total Quantity | 1 |
| Top Fans Size | 140mm |
| Over Load Protection | Yes |
| Short Circuit Protection | Yes |
| Under Voltage Protection | Yes |
| Over Current Protection | Yes |
| Over Power Protection | Yes |
| Shipping weight | 2.27 kg |
| Package size | 254 × 203 × 102 mm |
Questions about this item
What cables come attached to the TOPOWER TOP-700WB1 and what must I add?
The unit has a fixed 20+4 pin main connector, one 6 pin and two 6+2 pin PCIe connectors, and eight SATA power connectors. No modular cables are included because the PSU is non-modular.
Which version of the TOP-700WB1 should I pick for a build that needs 700 W?
This model is a single 700 W ATX12V/EPS12V unit with 80 PLUS Bronze certification and active PFC; there are no alternative capacities or versions listed.
What does the 700 W rating mean when the PSU is installed in a PC?
It can deliver up to 700 W of continuous DC power across all rails while meeting 80 PLUS Bronze efficiency at 100-240 V input, protected by over-voltage and overload circuits.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



