TOPGREENER 4-Hour No Neutral Countdown Timer Switch, Light Almond
Automatically shuts off lights or fans after a chosen countdown of 5 min, 10 min, 30 min, 60 min, 2 hours or 4 hours, requires no neutral wire and fits standard wall boxes
- Automatically turns off lights and fans to save energy
- Six preset countdown options from 5 min to 4 hours
- Blue LED blinks twice to confirm the selected timer setting
- No neutral wire required for installation, ground wire is required
- UL listed with V2 flammability rating for safe operation
4-Hour Countdown Timer Switch
The TOPGREENER switch replaces a standard wall switch and automatically cuts power after a chosen interval. Six preset buttons offer 5 min, 10 min, 30 min, 60 min, 2 hours and 4 hours, while a manual button overrides the timer. A blue LED blinks twice to confirm the selection then stays dark. It suits lights, ceiling fans, bathroom fans, heaters and similar loads in bathrooms, closets, pantries, garages or laundry rooms.
No Neutral Wiring Required
The device operates without a neutral wire, simplifying retrofit in older boxes. A ground wire is mandatory for installation. The silicone keypad provides tactile feedback for each preset. Compatible load ratings are 800W incandescent, 800W fluorescent, 150W LED or CFL, 1200W tungsten and 1/2 HP motor at 120VAC 60Hz.
Load And Temperature Limits
The switch is UL listed with a UL 94 V2 flammability rating and operates between 32°F and 131°F. It cannot drive loads exceeding the stated wattage or motor limits. Wall plate is sold separately. Buyers needing longer than 4 hours or a neutral-dependent smart timer will not be served by this model.
Highlights
- Automatically turns off lights and fans to save energy
- Six preset countdown options from 5 min to 4 hours
- Blue LED blinks twice to confirm the selected timer setting
- No neutral wire required for installation, ground wire is required
- UL listed with V2 flammability rating for safe operation
Specifications
| Brand | TOPGREENER |
|---|
Questions about this item
Does the blue LED indicator need replacing over time?
The blue LED blinks twice to confirm the chosen timer setting and then stays off, so it is not continuously lit and should last the life of the switch.
Which load rating is reached first when running a bathroom fan continuously?
The motor rating of 1/2HP is the limiting factor for fan loads; the switch also supports up to 800W fluorescent and 150W LED or CFL.
How much heat does the switch generate when left on for a full four-hour cycle?
The unit is rated for an operating temperature range of 32°F to 131°F and carries a UL 94 V2 flammability rating, indicating safe thermal performance under load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



