toolant TA01115009 7-Inch Pliers Wrench 10:1 Lever Ratio
A 7-inch pliers wrench with a 10:1 lever ratio, smooth parallel jaws and push-button quick adjust, supplied with a belt pouch
- Size/Dimensions45"
- MaterialSteel
- Color/FinishBlack
- FeaturesGripping, Twisting, Breaking
- Selling Unit1
- Overall Length4.3942 L x 7.493 W x 24.511 H centimeters
- Drop-forged CR-V steel resists flex under heavy load
- 40 mm jaw capacity covers 1-1/2 inch pipe fittings
- 10:1 lever ratio cuts grip effort on repetitive turns
- Push-button quick adjust locks jaw width in seconds
- Smooth parallel jaws grip chrome fixtures without scratching
Toolant 7-Inch Pliers Wrench with 10:1 Ratio
The Toolant TA01115009 is a 7-inch pliers wrench built from drop-forged CR-V steel for professional tradespeople and serious DIY users. Its 10:1 lever ratio multiplies hand force so that gripping, twisting and breaking tasks on pipe fittings, fasteners and hardware require less grip effort. A push-button quick-adjust mechanism locks the parallel jaws at the needed width without removing the tool from the workpiece.
Heat-treated steel body and zinc phosphate finish
The heat-treated chromium-vanadium steel body resists flex under load while the zinc phosphate coating protects against rust in damp crawl spaces and outdoor jobsites. Smooth parallel jaws apply uniform pressure across flats up to 40 mm, preventing rounding on soft brass or chrome fixtures. Ergonomic curved handles with fiberglass cores and rubber grips distribute pressure across the palm to reduce wrist fatigue during repetitive tightening.
Belt-loop pouch enables hands-free carry
The included reinforced neoprene rubber pouch attaches to a belt loop so the wrench stays accessible while climbing ladders or moving between work areas. Parallel jaw geometry eliminates the need for multiple fixed wrenches by covering a 1.5-inch pipe capacity in a single tool. Buyers who need jaw capacities beyond 7 inches or specialised jaw profiles for non-standard fittings will require a different tool.
Highlights
- Drop-forged CR-V steel resists flex under heavy load
- 40 mm jaw capacity covers 1-1/2 inch pipe fittings
- 10:1 lever ratio cuts grip effort on repetitive turns
- Push-button quick adjust locks jaw width in seconds
- Smooth parallel jaws grip chrome fixtures without scratching
Specifications
| Brand | toolant |
|---|---|
| Model | TA01115009 |
| Size/Dimensions | 45" |
| Material | Steel |
| Color/Finish | Black |
| Features | Gripping, Twisting, Breaking |
| Selling Unit | 1 |
| Overall Length | 4.3942 L x 7.493 W x 24.511 H centimeters |
| Jaw Capacity | 7-Inch Black |
| Handle Type | Rubber |
| Handle Length | 7 inches |
| Jaw Width | 7 inches |
| Number of Positions | 1 |
| Handle Material | Fiberglass w/ Rubber Grips |
| Pipe Capacity | 1.5 inches |
| Strap Material | Reinforced Neoprene Rubber |
| Compatibility/Fitment | Gripping, Twisting, Breaking |
| Commercial/Residential | Gripping, Twisting, Breaking |
| Part Number | TA01115009 |
Questions about this item
How do I engage the push-button quick-adjust on the TA01115009 without lifting it off the fastener?
Press the button to release the groove-lock, slide the jaw to the 40 mm capacity needed for 1.5 inch pipe, then release the button to lock the parallel jaws flat on the hex before applying torque.
What maintenance does the zinc phosphate finish on the CR-V steel body need to keep rust resistance in damp crawl spaces?
Wipe moisture off after each use, apply a light oil film monthly, and inspect the coating for scratches that expose bare metal; the finish itself is not user-replaceable.
At what jaw opening does the 10:1 lever ratio start to drop off during sustained tightening on large fittings?
The mechanical advantage is highest near the centre of the 40 mm range and decreases as the jaws approach full 1.5 inch capacity, so expect noticeably higher hand force at maximum opening.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
