We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver XLR condenser microphone on steel boom arm with shock mount and pop filter

TONOR TC20 XLR Condenser Microphone Kit with T20 Boom Arm

SKU CH-SG3Z-VK29R

XLR condenser microphone kit with steel boom arm, shock mount, pop filter and 2m cable for studio recording and streaming

  • ColorSilver
  • ConnectorXLR
  • Microphone Sensitivity-45 decibels
  • Microphone Impedance2200 ohm
  • Microphone Signal to Noise Ratio(SNR)78 decibels
  • FeaturesStand
  • Cardioid pattern cuts background noise for clean vocals
  • 16 mm capsule with 20 Hz – 20 kHz response captures full detail
  • 4 m boom arm clamps desks up to 60 mm thick
  • 94 dB signal-to-noise ratio delivers quiet, professional recordings
  • Kit includes shock mount, pop filter, 2 m XLR cable and mic cover

What the kit provides

The TONOR TC20 is an XLR condenser microphone supplied with a T20 steel boom arm, shock mount, pop filter, wind cover, cable ties and a two-metre XLR cable. It is aimed at streamers, podcasters and home-studio users who want a complete desktop kit for vocal work.

Behaviour under sustained load

The capsule handles up to 120 decibels SPL with total harmonic distortion below one percent, so loud vocals or close-miked instruments stay clean during long sessions. A cardioid pattern and 94 decibels signal-to-noise ratio keep background pickup low even when gain is raised for quiet passages.

Thermals, noise and power

As a passive transducer the microphone generates no heat and adds no fan noise. It requires 48 volts phantom power from an interface, mixer or preamp, drawing only the tiny current the external supply provides. The steel arm clamps to desks up to 2.4 inches thick and supports microphones weighing up to 1.8 kilograms.

Highlights

  • Cardioid pattern cuts background noise for clean vocals
  • 16 mm capsule with 20 Hz – 20 kHz response captures full detail
  • 4 m boom arm clamps desks up to 60 mm thick
  • 94 dB signal-to-noise ratio delivers quiet, professional recordings
  • Kit includes shock mount, pop filter, 2 m XLR cable and mic cover

Specifications

BrandTONOR
ModelTC20
Part NumberTNTN120109BL
ColorSilver
ConnectorXLR
Microphone Sensitivity-45 decibels
Microphone Impedance2200 ohm
Microphone Signal to Noise Ratio(SNR)78 decibels
FeaturesStand

Questions about this item

How much noise does the TC20 add when it runs all day in a quiet room?

The microphone has a signal-to-noise ratio of 94 dB, so its self-noise is very low and will not add noticeable hiss during long sessions.

What extra gear must I already own to power the TC20 XLR condenser microphone?

You need a device that supplies 48 V phantom power — such as an audio interface, mixer, or dedicated preamp — because the TC20 cannot operate on its own.

Will the included T20 boom arm hold the TC20 securely on a desk that is 2.4 inches thick?

Yes, the T20 arm clamps to desks up to 2.4 inches thick and supports microphones up to 1.8 kg, so the TC20 fits well within its capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.