We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tolco 4 B sway brace pipe clamp, 4 inch conduit, steel, plain finish, 8 3/8 by 1 1/8 inches

Tolco

Tolco 4 B Sway Brace Pipe Clamp 4 in Conduit

SKU CH-ZVFJ-XSDFC

A 4-inch steel sway-brace pipe clamp, 8 3/8 in long and 1 1/8 in wide with a plain finish, meets OPM and OSHPD standards for conduit support

  • TypeConduit & Raceways
  • Designed for 4 in nominal conduit, pipe or threaded rod
  • 8 3/8 in length provides secure sway brace attachment
  • 1 1/8 in width fits standard mounting configurations
  • Plain steel finish suits indoor and protected outdoor runs
  • Meets OPM and OSHPD seismic standards

Tolco 4-Inch Sway Brace Clamp

The Tolco 4 B sway brace pipe clamp secures 4-inch conduit, pipe or threaded rod against lateral movement. It is intended for electrical contractors and mechanical installers who need code-compliant seismic or sway restraint in commercial and industrial projects. The plain-finish steel body meets OPM and OSHPD standards for structural attachment.

OPM and OSHPD Compliance Included

The clamp is manufactured to satisfy OPM and OSHPD requirements, so inspectors accept it for essential-facility piping systems without additional engineering submittals. Its 8 3/8-inch length and 1 1/8-inch width provide the bearing surface the standards demand, while the plain finish allows field painting or coating to match project specifications.

Handles 4-Inch Nominal Trade Size

The clamp fits nominal 4-inch conduit, pipe or threaded rod, delivering the listed bearing area for horizontal sway loads. It does not accommodate smaller or larger trade sizes, so separate clamps are required for each pipe diameter on the job. The plain steel offers no corrosion protection beyond the factory finish.

Highlights

  • Designed for 4 in nominal conduit, pipe or threaded rod
  • 8 3/8 in length provides secure sway brace attachment
  • 1 1/8 in width fits standard mounting configurations
  • Plain steel finish suits indoor and protected outdoor runs
  • Meets OPM and OSHPD seismic standards

Specifications

BrandTOLCO
TypeConduit & Raceways

Questions about this item

Will the 4-inch steel clamp need periodic re-torquing after installation?

The plain-finish steel clamp has no moving parts; once the set screws are torqued to the conduit specification it requires no scheduled re-tightening.

What load limit governs the 8 3/8-inch brace length under continuous seismic loading?

The brace is rated to OPM and OSHPD sway-brace standards, so the published seismic design load for 4-inch conduit is the governing limit.

How much heat does the plain-finish steel body add to a conduit run operating all day?

The clamp is a passive steel component; it contributes no measurable heat beyond the ambient temperature of the surrounding conduit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.