TNP Products
TNP Products Cat7 Ethernet Cable 100 FT S/STP 600 MHz 10 Gbps 2 in 1 accessory
A 100 ft Cat7 S/STP patch cable rated for 10 Gbps at 600 MHz with gold-plated RJ45 connectors
- Supports 10 Gbps speeds for 4K streaming and gaming
- 600 MHz bandwidth handles demanding server and cloud workloads
- S/STP shielding with gold-plated RJ45 blocks EMI/RFI interference
- 100 ft length reaches distant routers, consoles and NAS devices
- Backward compatible with Cat5, Cat5e and Cat6 networks
100 FT Cat7 S/STP cable
This 100-foot Category 7 patch cable uses Screened Shielded Twisted Pair construction with gold-plated RJ45 connectors to deliver 10 Gbps bandwidth at up to 600 MHz. It suits home offices, gaming consoles, NAS devices and PoE equipment that need reliable wired LAN links over longer runs. The snagless boots protect the latch during frequent reconnection.
Check port speed and cable route
Verify that your router, switch or device ports support 10GBASE-T or at least 1000 BASE-T to use the full 10 Gbps capability. Ensure the 100-foot length can reach between endpoints without tight bends or crushing, and that existing cable runs are not already using the same pathway where interference could accumulate.
Sustained throughput with shielding
The S/STP shielding and gold contacts maintain consistent 10 Gbps throughput during extended 4K streaming, large NAS backups or cloud-server sessions by rejecting EMI and RFI that degrade unshielded cables over time. Backward compatibility with Cat5, Cat5e and Cat6 keeps the link stable even when mixed with older segments.
Highlights
- Supports 10 Gbps speeds for 4K streaming and gaming
- 600 MHz bandwidth handles demanding server and cloud workloads
- S/STP shielding with gold-plated RJ45 blocks EMI/RFI interference
- 100 ft length reaches distant routers, consoles and NAS devices
- Backward compatible with Cat5, Cat5e and Cat6 networks
Specifications
No published specifications for this item yet.
Questions about this item
Does the 100 FT cable come with any extra accessories or do I need to buy clips separately?
The listing describes a single 100 FT Cat7 patch cable with gold plated RJ45 connectors; no additional clips, ties or tools are mentioned as included.
Should I choose this 600 MHz Cat7 cable or a lower category for a 10 Gbps home network?
This Cat7 cable is rated for 600 MHz and 10 Gbps, meeting 10GBASE-T requirements, so it supports the full speed without needing a higher category.
Will the 600 MHz rating actually deliver 10 Gbps through my router and switch?
The cable is compliant with ANSI/TIA/EIA 568-B.2-1 and supports 10GBASE-T, 1000BASE-T, 100BASE-T and 10BASE-T, so it can carry 10 Gbps when both ends use compatible 10 Gbps ports.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
