Titan
Titan 14472 Outrigger Pad 18 x 18 x 1 in 50 ton
Polymer outrigger pad with non-skid surface supports 50 ton vertical load for bottle jacks and hydraulic rams
- TypeAutomotive Service & Shop Tools
- ColorBlack
- Supports 50 ton vertical load for heavy lifting
- 18 by 18 inch square footprint distributes pressure evenly
- Non-skid surface prevents equipment slippage during use
- Oil-resistant polymer withstands harsh job-site conditions
- Meets OSHA 29 CFR 1926.305 compliance requirements
Outrigger Pad for Heavy Loads
The Titan 14472 outrigger pad provides a stable polymer base rated for 50 ton vertical load capacity. It is designed for use with bottle jacks and hydraulic rams during lifting or stabilisation tasks. The square profile measures 18 in by 18 in with a 1 in thickness. This pad suits operators who need reliable ground support for heavy equipment.
Non-Skid Surface Handles Oil and Weight
A non-skid surface helps the pad resist movement under load while the polymer material offers oil-resistant properties. At 15 lb the pad remains manageable for positioning by a single worker. The rope-style handle with a blue grip aids carrying and placement on site. No power draw or cooling considerations apply to this passive component.
OSHA-Compliant Construction for Daily Use
Construction meets OSHA 29 CFR 1926.305 standards for jack accessories. The black polymer body resists common shop fluids and surface wear during repeated deployments. A rope handle integrates into the pad body so no separate mounting hardware is required. Buyers who need multiple pads for simultaneous jack points must purchase additional units.
Highlights
- Supports 50 ton vertical load for heavy lifting
- 18 by 18 inch square footprint distributes pressure evenly
- Non-skid surface prevents equipment slippage during use
- Oil-resistant polymer withstands harsh job-site conditions
- Meets OSHA 29 CFR 1926.305 compliance requirements
Specifications
| Brand | TITAN |
|---|---|
| Type | Automotive Service & Shop Tools |
| Color | Black |
Questions about this item
How do I position the 18 in by 18 in Titan 14472 pad under a bottle jack or hydraulic ram so it does not shift?
Center the jack or ram on the non-skid polymer surface with the 1 in thickness flat on stable ground; the blue rope handle stays clear so the pad cannot slide out under the 50 ton vertical load.
What wear or damage on the 1 in thick polymer pad means I must replace it before the next lift?
Replace the pad if the non-skid texture is worn smooth, if oil has softened the material, or if any crack appears across the 18 in square face.
At what point does the 50 ton vertical load rating become the limiting factor during a long lift?
The 50 ton limit is reached the moment the applied force equals that value; the OSHA 29 CFR 1926.305 reference does not raise the capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
