OmniTrade
OmniTrade DR420 Drum Unit for Brother Printers
- Single Pack
- Brother
$12.99
0.00015219BTC
In stock
TIOPY S-TOOL KIT 42Pcs 3D Printer Nozzle Cleaning Tool Kit
42-piece kit clears clogged 3D-printer nozzles with 31 stainless-steel needles in nine sizes from 0.15 mm to 0.8 mm plus wire brushes, tweezers.
- ColorMulti-color
- TypeS-TOOL KIT
- Clear clogs across most nozzles with 31 needles in 9 sizes from .15 to .8 mm
- Remove stubborn residue using stainless and copper wire brushes on hotend surfaces
- Trim model burrs precisely with a stainless carving knife plus 5 replacement blades
- Reach tight angles with straight and curved stainless steel tweezers for detailed cleaning
- Keep all 42 pieces organised and portable in the included zipper tool bag
42-Piece Nozzle Cleaning Kit for 3D Printers
This kit supplies 31 stainless-steel cleaning needles in nine diameters from 0.15 mm to 0.8 mm plus two wire brushes, two tweezers, a carving knife with five spare blades and a zipper tool bag. It is built for hobbyists and small-shop operators who need to clear clogged nozzles and remove print burrs on a regular basis.
Check nozzle diameter
Verify that your printer uses nozzles within the 0.15 mm to 0.8 mm range so the supplied needles fit. Ensure the hot end can be reached with a 25 mm to 60 mm needle length and that there is room to manoeuvre the brushes and tweezers around the heater block.
Replaces individual needles and improvised picks
The set consolidates separate cleaning pins, makeshift wires and single-purpose knives into one organised bag. The jump is worth it when you frequently switch nozzle sizes or spend time fashioning tools, because every common diameter and a burr-removal blade are immediately available.
Highlights
- Clear clogs across most nozzles with 31 needles in 9 sizes from .15 to .8 mm
- Remove stubborn residue using stainless and copper wire brushes on hotend surfaces
- Trim model burrs precisely with a stainless carving knife plus 5 replacement blades
- Reach tight angles with straight and curved stainless steel tweezers for detailed cleaning
- Keep all 42 pieces organised and portable in the included zipper tool bag
Specifications
| Brand | TIOPY |
|---|---|
| Model | S-TOOL KIT |
| Part Number | S-TOOL KIT |
| Color | Multi-color |
| Type | S-TOOL KIT |
Questions about this item
What tools and accessories are included in the 42-piece kit?
The kit contains 31 stainless steel nozzle cleaning needles in nine diameters from 0.15 mm to 0.80 mm, two wire brushes, two stainless steel tweezers, one carving knife with five replacement blades, and a zippered tool bag.
Which needle sizes should I pick for a standard 0.4 mm nozzle?
The 0.40 x 50 mm needles are sized for a 0.4 mm nozzle; the set also includes 0.35 mm and 0.50 mm needles for slightly smaller or larger openings.
How effective are the 0.40 mm needles at clearing a real-world clog?
The 0.40 x 50 mm needles match the bore of a typical 0.4 mm nozzle, allowing them to push through hardened filament and restore flow without damaging the orifice.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
