We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast-iron pillow block bearing with double seals and set-screw locking

Timken

Timken YAS 3/4 SGT Pillow Block Bearing collectible

SKU CH-KMHN-H01NT

A new Timken pillow block bearing with cast iron housing, 3/4 inch bore and double-sealed radial ball insert

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlack
  • New collectible pillow-block bearing from Timken
  • Cast-iron housing with alloy-steel radial ball insert
  • Double-sealed closure rated from -65 °F to 200 °F
  • 3/4 in cylindrical bore with set-screw locking
  • Bolt-through base on 3 25/32 in centres

Collectible Pillow Block Bearing

This Timken YAS 3/4 SGT pillow block bearing is offered as a new collectible within the sports memorabilia category. It features a cast iron housing with a black finish and a radial ball bearing insert made from alloy steel. The unit uses a set screw locking mechanism and double sealed closures for contamination protection. It represents a piece of industrial hardware history for display or collection purposes.

Replaces Worn Industrial Units

As a new old stock item, this bearing serves as a direct replacement for worn or damaged pillow block units in existing machinery. The jump is worth it when restoring vintage equipment where original Timken specifications are required for authenticity. The 3/4 inch cylindrical bore and two bolt through mount holes match the original mounting pattern. Collectors acquire it for preservation rather than for upgrading modern power transmission systems.

Limited By Cast Iron Housing

The cast iron housing and NGLI #2 equivalent lubricant restrict the operating envelope to between -65 degrees F and 200 degrees F. The base height of 0.594 in and overall height of 2.593 in with a 5 in overall length fix the installation footprint. The mount hole center to center length of 3 25/32 in cannot be altered. These physical and thermal limits define where this specific bearing can be practically applied.

Highlights

  • New collectible pillow-block bearing from Timken
  • Cast-iron housing with alloy-steel radial ball insert
  • Double-sealed closure rated from -65 °F to 200 °F
  • 3/4 in cylindrical bore with set-screw locking
  • Bolt-through base on 3 25/32 in centres

Specifications

BrandTIMKEN
TypeBearings, V-belts & Power Transmission Equipment
ColorBlack

Questions about this item

What size bolts fit the 3 25/32 in center-to-center mount holes?

The housing has two bolt-through holes spaced 3 25/32 in apart; use bolts that match the hole diameter and length for your mounting surface.

How do I secure the bearing onto a 3/4 in shaft?

Slide the cylindrical bore over the shaft and tighten the set screws evenly to lock the inner ring without over-torquing.

When should I re-grease the NGLI #2 equivalent lubricant?

Re-lubricate on a schedule based on load, speed and environment; the double-sealed insert holds NGLI #2 equivalent grease rated from -65 Degrees F to 200 Degrees F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.