We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast-iron pillow block bearing with alloy steel insert, 1 1/8 in bore, double sealed, bolt-through mount

Timken

Timken YAS 1 1/8 SGT Pillow Block Bearing collectible

SKU CH-GFMG-K2M5Y

A cast-iron pillow block bearing with a 1 1/8 in bore, double-sealed radial ball insert, and NGLI #2 equivalent lubricant for -65 to 200 °F operation

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlack
  • Ready for installation with bolt-through two-hole mounting
  • Cast iron housing resists shock and vibration in heavy-duty use
  • Double-sealed radial ball insert keeps contaminants out
  • Pre-lubricated with NLGI #2 equivalent grease for immediate service
  • Operates reliably from -65 °F to 200 °F

Collectible Timken Pillow Block

This new Timken YAS 1 1/8 SGT pillow block bearing is offered as a piece of sports memorabilia and industrial collectible. It features a cast iron housing with a black finish and a radial ball insert made from alloy steel. The unit arrives double sealed and pre-lubricated with an NGLI #2 equivalent grease.

Installation Notes

The bearing uses a bolt-through mount with two holes spaced at a center-to-center length of 4 5/8 in. Installers must ensure the mounting surface matches this spacing and is flat to prevent housing distortion. The cylindrical bore fits a 1 1/8 in shaft and relies on set screws for locking, which should be tightened to the manufacturer's torque specification to avoid slippage or inner ring damage.

Compatibility Check

Verify that your shaft diameter is exactly 1 1/8 in and that the application operates within the temperature range of -65 Degrees F to 200 Degrees F. Confirm the base height of .657 in and overall height of 3.328 in fit your machine envelope. This collectible unit is not suited for buyers needing different bore sizes, housing materials, or mounting configurations.

Highlights

  • Ready for installation with bolt-through two-hole mounting
  • Cast iron housing resists shock and vibration in heavy-duty use
  • Double-sealed radial ball insert keeps contaminants out
  • Pre-lubricated with NLGI #2 equivalent grease for immediate service
  • Operates reliably from -65 °F to 200 °F

Specifications

BrandTIMKEN
TypeBearings, V-belts & Power Transmission Equipment
ColorBlack

Questions about this item

How can I verify the pillow block bearing is operating correctly after installation?

Check that the shaft rotates smoothly without binding, confirm the double-sealed closures show no leakage, and ensure operating temperature stays between -65 and 200 degrees F.

What comes in the box and what must I purchase separately for the YAS 1 1/8 SGT?

The pillow block bearing with cast-iron housing and alloy-steel radial ball insert is supplied; mounting bolts, lubricant and any shaft adapters are not included.

Which bore size should I select for a 1 1/8 inch shaft on this Timken pillow block?

Choose the 1 1/8 in bore diameter version, which matches a cylindrical 1 1/8 in shaft and provides a 1 43/64 in center height.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.