We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast iron pillow block bearing with alloy steel insert, double sealed, cylindrical bore 1 1/4 in

Timken

Timken YAS 1 1/4S SGT Pillow Block Bearing collectible

SKU CH-0RRP-F4PZH

A new Timken pillow-block bearing with a cast-iron housing, 1 1/4-inch bore and double seals for radial ball applications

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlack
  • Alloy steel insert resists wear under heavy radial loads
  • Cast iron housing withstands 200 °F operating temperature
  • Double-sealed closure keeps contaminants out at -65 °F
  • Bolt-through mount with two holes simplifies installation
  • Compact 3.281 in height fits tight machinery spaces

Product identity

This Timken pillow block bearing is a new collectible item categorised under sports memorabilia. It carries the TIMKEN brand and features a cast iron housing with a black finish. The unit is supplied as a set and is intended for display or collection purposes rather than active installation.

Thermal and environmental limits

The bearing is rated for continuous operation between minus 65 degrees F and 200 degrees F using an NGLI #2 equivalent lubricant. Its double-sealed closure helps retain lubricant and exclude contaminants during normal service. No noise or power-draw figures are provided for this collectible unit.

Sustained-load behaviour

With a 1 1/4 inch cylindrical bore and alloy steel radial ball insert, the bearing is designed to handle radial loads within its published temperature range. The cast iron housing and two bolt-through mounting holes on a 4 5/8 inch centre-to-centre spacing provide rigid location under prolonged loading. Collectors should note the overall dimensions of 6.187 in length, 3.281 in height and 1.656 in width.

Highlights

  • Alloy steel insert resists wear under heavy radial loads
  • Cast iron housing withstands 200 °F operating temperature
  • Double-sealed closure keeps contaminants out at -65 °F
  • Bolt-through mount with two holes simplifies installation
  • Compact 3.281 in height fits tight machinery spaces

Specifications

BrandTIMKEN
TypeBearings, V-belts & Power Transmission Equipment
ColorBlack

Questions about this item

How do I bolt the 1 1/4 in bore pillow block to the frame without misaligning the 4 5/8 in center-to-center holes?

Align the two bolt-through holes on the 4 5/8 in centers, start both bolts by hand, then torque them evenly in a cross pattern so the cast-iron housing seats flat and the cylindrical bore stays true.

When should I plan to re-grease the double-sealed radial ball insert that ships with NGLI #2 equivalent lubricant?

Re-lubricate through the fitting at intervals matched to speed and load; the factory NGLI #2 equivalent fill is good for initial running, but sustained operation will purge grease past the double seals.

At what temperature will the NGLI #2 equivalent grease in this bearing reach its upper limit during continuous duty?

The lubricant is rated to 200 Degrees F; sustained running above that temperature will degrade the grease and shorten insert life.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.