We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray cast-iron rhombus flange bearing with double-sealed alloy steel ball insert

Timken

Timken VCJT 1 7/16 Flange Bearing Collectible

SKU CH-8QPT-8M01N

A collectible Timken two-bolt flange bearing with a 1-7/16 inch bore, alloy steel insert, and cast iron housing

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorGray
  • Durable cast-iron housing resists heavy loads
  • Double-sealed closure keeps contaminants out
  • Fixed expansion design maintains precise shaft alignment
  • Ready-to-mount two-bolt pattern speeds installation
  • Operates from minus 65 to 200 degrees F

Collectible Timken Flange Bearing

This new Timken VCJT flange bearing arrives as a collectible piece of industrial heritage. The cast-iron rhombus housing and alloy-steel radial ball insert show the construction used in power-transmission equipment. Gray finish and double-sealed closure preserve the original factory appearance. It suits collectors who value authentic mechanical components.

GRA107RRB Insert and NLGI #2 Lubricant

The boxed unit includes the GRA107RRB bearing insert already seated in the housing. Factory-applied NLGI #2 equivalent grease means the bearing is lubricated to the original specification. Double-sealed closures keep that lubricant in place and contaminants out. No separate seals, collars or mounting hardware are mentioned in the data.

Two-Bolt Mounting on a Flat Surface

Two mounting holes in the rhombus flange allow direct bolting to a flat surface. Fixed expansion type holds the shaft axially without additional collars. Cylindrical 1 7/16 inch bore accepts a matching shaft; verify shaft tolerance before pressing. Operating range spans -65 to 200 degrees F at up to 3,840 RPM. Not for buyers who need a pillow-block or four-bolt flange style.

Highlights

  • Durable cast-iron housing resists heavy loads
  • Double-sealed closure keeps contaminants out
  • Fixed expansion design maintains precise shaft alignment
  • Ready-to-mount two-bolt pattern speeds installation
  • Operates from minus 65 to 200 degrees F

Specifications

BrandTIMKEN
TypeBearings, V-belts & Power Transmission Equipment
ColorGray

Questions about this item

How often will the NLGI #2 equivalent lubricant need replenishment for the GRA107RRB insert?

The double-sealed GRA107RRB insert is factory-filled with NLGI #2 equivalent grease and designed for maintenance-free operation under normal conditions; relubrication is only required if the unit runs continuously near its 3,840 RPM limit or in heavily contaminated environments.

What operational limit will be reached first when the bearing runs continuously at high speed?

The 3,840 RPM maximum speed rating is the primary limit; exceeding it risks overheating the alloy-steel balls and cast-iron housing before the 200 °F temperature ceiling becomes a factor.

How much heat and noise should I expect from the cast-iron housing during all-day operation?

The fixed, double-sealed design with NLGI #2 grease keeps noise low and housing temperature well below the 200 °F maximum during normal 3,840 RPM duty; the gray cast-iron housing dissipates heat evenly without fan assistance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.