We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square gray cast-iron flange bearing, four bolt holes, 1-3/16 inch bore

Timken

Timken SCJ 1 3/16 Flange Bearing collectible

SKU CH-QP8X-BB0MJ

A new Timken four-bolt flange bearing with a 1-3/16 in bore, alloy-steel radial ball insert, cast-iron housing and double seals rated to 4,640 RPM

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorGray
  • New collectible flange bearing ready for display
  • Timken brand trusted for industrial quality
  • 1-3/16 inch bore fits specific shaft sizes
  • Double sealed closure keeps contaminants out
  • Cast iron housing rated to 200 degrees F

Industrial Bearing Collectible

This new Timken SCJ flange bearing arrives as a collectible piece of industrial hardware. The 4-bolt square housing is cast iron with a gray finish. It contains a GYA103RRB radial ball insert made from alloy steel. The unit is double sealed and fixed against expansion.

1-3/16 Inch Bore Capacity

The cylindrical bore measures 1-3/16 inches and suits shafts of that exact size. Maximum operating speed reaches 4,640 RPM for moderate rotation needs. Temperature limits span from -65 to 200 degrees Fahrenheit. NLGI #2 equivalent lubricant is factory filled for immediate service.

Mounting Hardware Included

Four bolt holes on a 3-1/4 inch center-to-center height accept standard fasteners. Back side to center width is .437 inch for spacing calculations. Double seals retain lubricant and exclude contaminants without extra parts. Fixed housing design prevents axial movement during operation.

Highlights

  • New collectible flange bearing ready for display
  • Timken brand trusted for industrial quality
  • 1-3/16 inch bore fits specific shaft sizes
  • Double sealed closure keeps contaminants out
  • Cast iron housing rated to 200 degrees F

Specifications

BrandTIMKEN
TypeBearings, V-belts & Power Transmission Equipment
ColorGray

Questions about this item

Will the 1 3/16 in bore match the shaft on my older conveyor roller?

The bearing has a 1 3/16 in cylindrical bore. Measure your shaft diameter to confirm an exact match before installation.

How can I confirm the GYA103RRB insert is running correctly after mounting?

The double-sealed radial ball insert runs on NLGI #2 equivalent grease. Smooth rotation without noise or excess heat up to 200 °F indicates proper operation.

Does the package include mounting bolts for the 3 1/4 in centre-to-centre holes?

The box contains the flange bearing with GYA103RRB insert installed. Mounting bolts for the 3 1/4 in hole pattern are not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.