We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray cast iron pillow block bearing SAS 5/8 inch bore double sealed set screw mount

Timken

Timken SAS 5/8 Pillow Block Bearing Cast Iron Set Screw Collectible

SKU CH-EKJY-4Q9CX

A collectible Timken SAS 5/8 pillow block bearing with cast-iron housing and set-screw mounting

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorGray
  • Cast iron housing withstands heavy industrial loads
  • Double-sealed closure keeps contaminants out at 200 °F
  • Set-screw locking secures 5/8 in shaft without extra parts
  • NGLI #2 grease factory-filled for -65 °F to 200 °F range
  • Compact 2.218 in height fits tight mounting spaces

Genuine Timken SAS 5/8 Pillow Block Bearing

This pillow block bearing carries the Timken brand and is supplied in new condition. It belongs to the sports memorabilia and collectibles category, making it suitable for display or reference collections. The cast iron housing gives it a distinctive gray appearance.

Verify bore diameter and mount pattern before

The bearing accepts a cylindrical bore of 5/8 in and uses a two-hole bolt-through pattern with a centre-to-centre length of 3 5/8 in. Base height measures .468 in while overall height reaches 2.218 in and overall length 4.859 in. Confirm these dimensions match the intended display or mounting surface.

Double-sealed insert handles sustained temperature

The radial ball insert is double sealed and lubricated with an NGLI #2 equivalent grease. It is rated for continuous operation from -65 Degrees F up to 200 Degrees F. Alloy steel construction supports long-term load carrying without frequent re-lubrication.

Highlights

  • Cast iron housing withstands heavy industrial loads
  • Double-sealed closure keeps contaminants out at 200 °F
  • Set-screw locking secures 5/8 in shaft without extra parts
  • NGLI #2 grease factory-filled for -65 °F to 200 °F range
  • Compact 2.218 in height fits tight mounting spaces

Specifications

BrandTIMKEN
TypeBearings, V-belts & Power Transmission Equipment
ColorGray

Questions about this item

What comes with the Timken SAS 5/8 pillow block bearing and what must be purchased separately?

The unit includes the cast-iron housing, alloy-steel radial ball insert with double seals, and NGLI #2 equivalent lubricant. Mounting bolts are not supplied.

Which version of the SAS 5/8 bearing should I choose for my shaft?

Select this model when your shaft is exactly 5/8 in cylindrical and you need a bolt-through, two-hole base with 3 5/8 in centre spacing.

What does the 200 °F maximum temperature mean once the bearing is installed?

It is the highest continuous operating temperature the lubricant and seals can withstand; above that the grease may degrade and the seals can fail.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.