We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray cast-iron pillow block bearing, SAS 1/2, new condition

Timken

Timken SAS 1/2 Pillow Block Bearing Collectible

SKU CH-ZA93-FFMBS

A cast-iron pillow block bearing with a 1/2 in bore, double-sealed radial ball insert and bolt-through mounting for power-transmission applications

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorGray
  • Brand-new Timken SAS pillow block bearing for collectors
  • Cast iron housing with alloy steel radial ball insert
  • Double-sealed closure rated from -65 °F to 200 °F
  • 1/2 in cylindrical bore fits standard shafts
  • Compact 2.218 in height suits tight installations

Collectible Timken SAS Bearing

This new Timken SAS 1/2 pillow block bearing is offered as a piece of sports memorabilia and collectible merchandise. It features a gray cast iron housing and a radial ball insert made from alloy steel with a cylindrical bore. The double sealed closure protects the NGLI #2 equivalent lubricant inside.

Upgrade From Plain Bushings

The unit replaces simple bushings or worn fixed bearings where a 1/2 in bore and bolt through mounting are required. The jump is worth it when an application demands the 3 5/8 in mount hole spacing and the factory set screw locking method for secure shaft retention.

Temperature And Housing Limits

The cast iron housing and seals limit continuous operation to a maximum of 200 degrees F and a minimum of -65 degrees F. The overall height of 2.218 in and length of 4.859 in fix the envelope, while the base height of .468 in and center height of 1 11/64 in dictate shimming needs.

Highlights

  • Brand-new Timken SAS pillow block bearing for collectors
  • Cast iron housing with alloy steel radial ball insert
  • Double-sealed closure rated from -65 °F to 200 °F
  • 1/2 in cylindrical bore fits standard shafts
  • Compact 2.218 in height suits tight installations

Specifications

BrandTIMKEN
TypeBearings, V-belts & Power Transmission Equipment
ColorGray

Questions about this item

What is the center height of the SAS 1/2 pillow block bearing?

The center height is 1 11/64 inches, which determines the shaft height above the mounting surface.

How is the SAS 1/2 pillow block bearing mounted to a frame?

It uses a bolt-through mount with two holes spaced 3 5/8 inches center-to-center; align the base before tightening the bolts to avoid shaft misalignment.

What lubricant does the SAS 1/2 pillow block bearing contain from the factory?

It is filled with an NLGI #2 equivalent grease rated for -65 to 200 degrees Fahrenheit; relubricate through the fitting when the seals show wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.