We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray cast-iron pillow block bearing, 6.562 in long, 3.671 in high

Timken

Timken SAS 1 1/4 Pillow Block Bearing collectible

SKU CH-HZ3K-WZHH6

New Timken SAS pillow block bearing with cast-iron housing, 1 1/4 in bore, double-sealed radial ball insert, and -65 to 200 °F operating range

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorGray
  • SAS series bearing from the Timken brand
  • Double-sealed closure protects against contaminants
  • Cast-iron housing handles heavy-duty loads
  • Factory-filled with NGLI #2 equivalent lubricant
  • Operates from -65 °F to 200 °F

Collectible Timken Pillow Block

This collectible Timken SAS 1 1/4 pillow block bearing is offered as new sports memorabilia. It features a cast iron housing with a gray finish and a cylindrical bore diameter of 1 1/4 in. The unit uses a double-sealed radial ball insert made from alloy steel. It represents industrial heritage for display or collection purposes.

Factory Lubrication and Sealing

The bearing arrives lubricated with an NGLI #2 equivalent grease and includes double-sealed closures. This factory preparation protects the internal components from contamination during storage or display. The set screw mounting method secures the insert to the shaft without additional hardware. No assembly or maintenance is required for collectible use.

Temperature and Mounting Constraints

The bearing operates within a temperature range of -65 to 200 degrees F, suitable for standard indoor environments. Mounting requires two bolt-through holes with a center-to-center length of 5 1/8 in. The overall height measures 3.671 in and the overall length is 6.562 in. Buyers needing different bore sizes or mounting patterns should seek alternative items.

Highlights

  • SAS series bearing from the Timken brand
  • Double-sealed closure protects against contaminants
  • Cast-iron housing handles heavy-duty loads
  • Factory-filled with NGLI #2 equivalent lubricant
  • Operates from -65 °F to 200 °F

Specifications

BrandTIMKEN
TypeBearings, V-belts & Power Transmission Equipment
ColorGray

Questions about this item

How often should the NGLI #2 equivalent lubricant in the SAS bearing insert be replenished?

The bearing is double sealed and factory-filled with NGLI #2 equivalent grease, so no routine relubrication is required under normal operating conditions.

Which specification defines the continuous operating ceiling for the SAS pillow block?

The maximum temperature rating of 200 degrees F marks the upper limit for sustained use of the alloy-steel radial ball insert.

How much heat does the cast-iron housing dissipate when the SAS unit runs all day at load?

The cast-iron housing and double-sealed design operate within a -65 to 200 degree F range without external cooling under typical loads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.