We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Timken 212K radial ball bearing open metal ring 60 mm bore

Timken

Timken 212K Radial Ball Bearing 6212 60 mm Bore

SKU CH-6PGG-PGG5D

Open radial ball bearing with a 60 mm bore, 110 mm outside diameter and 58,272 N dynamic load capacity

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorTransparent
  • Open design allows easy inspection and lubrication
  • 60 mm bore fits standard metric shafts
  • 110 mm outside diameter supports heavy radial loads
  • 22 mm width provides stable mounting surface
  • Alloy steel rings and balls resist wear under load

60 mm Bore Radial Ball Bearing

The Timken 212K is a metric radial ball bearing built to industry number 6212. It uses alloy steel rings and balls with a steel cage for general-purpose rotation. The open closure leaves the rolling elements exposed for relubrication or inspection. This unit suits maintenance teams replacing a worn 60 mm bore bearing in existing equipment.

Open Closure 22 mm Wide Bearing

Buyers needing a sealed or shielded bearing to retain factory grease should look elsewhere. The open design requires the application to supply its own lubrication and contamination protection. Applications demanding an ABEC rating higher than 1 will not be satisfied by this part. Builders who need an integrated retaining ring must select a different model.

58 272 N Dynamic Radial Load Capacity

The bearing carries a dynamic radial load rating of 58 272 newtons. This single figure determines whether the part can handle the forces in your specific machine. Compare this value against the calculated load of your shaft and speed before purchasing.

Highlights

  • Open design allows easy inspection and lubrication
  • 60 mm bore fits standard metric shafts
  • 110 mm outside diameter supports heavy radial loads
  • 22 mm width provides stable mounting surface
  • Alloy steel rings and balls resist wear under load

Specifications

BrandTIMKEN
TypeBearings, V-belts & Power Transmission Equipment
ColorTransparent

Questions about this item

What shaft diameter does the 60 mm bore of this 6212 bearing fit?

The bore accepts a 60 mm shaft with a tolerance of +0/-0.015 mm, so the shaft must be at or slightly under 60 mm for a proper press fit.

Will the 110 mm outside diameter and 22 mm width match the housing and spacer dimensions on my existing equipment?

The bearing’s 110 mm outer diameter and 22 mm outer-ring width must match the housing bore and axial spacing already on your machine; verify those dimensions before installation.

After mounting, how can I confirm the open steel-cage bearing is running correctly?

Rotate the shaft by hand — it should turn smoothly without binding or noise, and the 1.5 mm fillet radius should seat cleanly against the shaft shoulder.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.