We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 SO-DIMM modules with black chips and gold contacts

Timetec

Timetec Hynix IC 8GB Kit (2x4GB) DDR3 1066MHz CL7 Laptop RAM

SKU CH-XJG2-DKAEF

Dual-channel 8 GB DDR3 kit (2 × 4 GB) running at 1066 MHz CL7 1.5 V for laptop upgrades

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCNo

Capacity 8GB (2 x 4GB)

  • Dual-channel 8GB kit expands multitasking headroom
  • DDR3 1066MHz CL7 timing accelerates data access
  • 5V JEDEC voltage ensures broad laptop compatibility
  • 204-pin SO-DIMM form factor fits standard notebook slots
  • Hynix ICs selected for stability under load

8 GB DDR3 kit for laptop upgrades

This Timetec kit supplies 8 GB of DDR3 memory as two 4 GB modules built with Hynix ICs. It targets owners of compatible notebooks who want to add capacity or replace existing sticks with a matched pair.

Replaces slower or smaller DDR3 SO-DIMMs

The jump is worthwhile when your system currently runs on less than 8 GB or uses modules rated below 1066 MHz and CL7. Swapping to this matched kit can raise the memory ceiling and tighten latency in one step.

Check DDR3 SO-DIMM slot count and voltage

Verify that your notebook accepts 204-pin unbuffered non-ECC DDR3 at 1.5 V and has two free slots or can replace the existing pair. The modules measure 30 mm by 67.6 mm, so confirm physical clearance before ordering.

Highlights

  • Dual-channel 8GB kit expands multitasking headroom
  • DDR3 1066MHz CL7 timing accelerates data access
  • 5V JEDEC voltage ensures broad laptop compatibility
  • 204-pin SO-DIMM form factor fits standard notebook slots
  • Hynix ICs selected for stability under load

Specifications

BrandTimetec
ModelMM-G4GD310S7C
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 204-pin SO-DIMM fit my laptop's memory slot?

The kit uses standard 204-pin DDR3 SO-DIMM modules measuring 30 mm by 67.6 mm, which match the JEDEC form factor for laptop memory slots.

What is the correct way to seat the modules during installation?

Insert each module at an angle into the 204-pin slot, then press down evenly until the side retention clips click into place on both sides.

Do these dual-rank 2Rx8 modules require any firmware updates or periodic maintenance?

No firmware updates are needed; the modules are non-ECC unbuffered DDR3 running at 1.50 V and operate maintenance-free for the life of the laptop.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.