Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081898BTC
In stock
ThreadLocker Red H271 50ml High Strength Anaerobic Sealer
High-strength anaerobic threadlocker prevents loosening and corrosion on fasteners up to M36, curing in 20 minutes with full strength after 24 hours
- Prevents rust and corrosion on metal threads with anaerobic curing formula
- High-strength locking for fasteners up to M36 with 25.5 N.m break torque
- Cures initially in 20 minutes and fully in 24 hours for reliable bonds
- Half-filled 50 ml bottle keeps adhesive liquid until anaerobic activation
- Suitable for automotive, industrial and furniture applications across -58 to 302 temperature range
High-Strength Anaerobic Threadlocker
ThreadLocker Red H271 is a high-strength anaerobic sealer designed to lock and seal threaded metal fasteners. The 50 ml bottle cures in the absence of air to prevent loosening from vibration and to block leak paths that cause rust and corrosion. Initial cure occurs in 20 minutes with full strength reached after 24 hours.
Mechanics and Maintenance Teams
This product suits technicians securing bolts up to M36 on engines, pumps and structural assemblies where disassembly requires heat and hand tools. It is not intended for low-strength needs, plastic threads, or applications where frequent adjustment with hand tools alone is required.
Consistent Performance Under Load
The adhesive delivers an average breaking torque of 25.5 N.m on standard test fixtures and maintains its bond across an operating range of -58 to 302 degrees Fahrenheit. Viscosity of 400 to 600 mPa.s at 25 degrees Celsius ensures even coverage on coarse and fine threads during sustained vibration and thermal cycling.
Highlights
- Prevents rust and corrosion on metal threads with anaerobic curing formula
- High-strength locking for fasteners up to M36 with 25.5 N.m break torque
- Cures initially in 20 minutes and fully in 24 hours for reliable bonds
- Half-filled 50 ml bottle keeps adhesive liquid until anaerobic activation
- Suitable for automotive, industrial and furniture applications across -58 to 302 temperature range
Specifications
| Brand | GNEOCO |
|---|
Questions about this item
What screw sizes does the M6-M20 range on this H271 threadlocker cover?
The H271 is rated for fasteners from M6 up to M20, so it suits most automotive and industrial bolts in that span.
Will this red 25.5 N.m high-strength grade release with standard hand tools if I need to service the joint later?
At 25.5 N.m average breaking torque, the cured bond typically requires heat and heavy-duty tools for removal, not ordinary hand wrenches.
How do I confirm the 400-600 mPa.s adhesive has cured properly after the 24-hour period?
After 24 hours at room temperature the bond reaches full strength; attempt to turn the fastener — if it holds at the rated torque without movement, the cure is complete.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
