We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White circular ceiling light 7.87 inches wide 1.3 inches high acrylic finish clear prismatic diffuser magnetic mount remote control

Thomasville Lighting KQT-CL-1W light kit 7.87" 300lm 15000mAh RGB 3CCT

SKU CH-K1GC-WD1P6 MPN KQT-CL-1W

A cordless, rechargeable LED ceiling light with motion sensing, RGB colour changing, three white colour temperatures and remote dimming

  • Product nameKQT-CL-1W - KANESIKI
  • warranties1 year purchase.
  • weight0.649 kilograms
  • descriptionKQT-CL-1W, KANESIKI, Cordless, USB Rechargeable, Adjustable
  • finishWhite
  • glassClear Prismatic
  • Motion sensor activates within 10 feet and 120° detection angle
  • Three colour temperatures 3000K 4500K 6000K plus 11 RGB colour options
  • 15000mAh battery gives 60 to 90 days motion mode or 24 to 30 hours continuous
  • Ultra thin 1.3 inch profile at 7.87 inch diameter with 300 lumens output
  • Magnetic or adhesive mounting requires no wiring and includes remote control up to 20 feet

Cordless RGB Ceiling Light Kit

The Thomasville Lighting KQT-CL-1W is a battery-operated flush-mount light kit designed for indoor spaces where wiring is impractical. It delivers 300 lumens through an LED panel with adjustable colour temperature and full RGB colour changing. A 15000mAh rechargeable cell powers the unit for up to 90 days in motion-sensor mode or 30 hours of continuous use. The kit includes a remote control, mounting hardware and a USB charging cable.

Magnetic Or Adhesive Mount Frees Up Wiring

Installation requires no electrical work: the light attaches via an iron mounting base that can be secured with supplied screws and anchors, double-sided adhesive tape or directly to a metal surface. The 120° motion sensor activates automatically within 10 feet in darkness and shuts off after a selectable delay of 20 seconds, 1 minute or 2 minutes. An always-on mode with a timer of 0.5 to 6 hours is also available from the remote, which operates up to 20 feet away.

Replaces Hard-Wired Fixtures In Damp Areas

This kit upgrades closets, showers, hallways and pantries that previously relied on battery puck lights or had no illumination at all. The 7.87-inch diameter and 1.3-inch profile fit tight ceilings while the IP-rated construction handles damp locations. It is not suited for buyers who need mains-powered reliability for all-night lighting, integrated smart-home protocols or a broader detection zone than 120°.

Highlights

  • Motion sensor activates within 10 feet and 120° detection angle
  • Three colour temperatures 3000K 4500K 6000K plus 11 RGB colour options
  • 15000mAh battery gives 60 to 90 days motion mode or 24 to 30 hours continuous
  • Ultra thin 1.3 inch profile at 7.87 inch diameter with 300 lumens output
  • Magnetic or adhesive mounting requires no wiring and includes remote control up to 20 feet

Specifications

BrandThomasville Lighting
ModelKQT-CL-1W
Product nameKQT-CL-1W - KANESIKI
warranties1 year purchase.
weight0.649 kilograms
descriptionKQT-CL-1W, KANESIKI, Cordless, USB Rechargeable, Adjustable Color Temperature, 1 year purchase., Plastic, LED, Battery Powered, Instruction Manual, 7.87 L x 7.87 W x 1.3 H inches
Part NumberKQT-CL-1W
finishWhite
glassClear Prismatic
sizeD7.87" x H1.3"
type of bulbLED
voltage5 volts
installationFlush Mount, Surface Mount
usageIndoor Only
control typeRemote Control
featuresLED
includedInstruction Manual, Remote Control, Mounting Hardware
materialAcrylic

Questions about this item

How long will the 15000mAh battery last before I need to recharge it?

Motion-sensor mode gives 60 to 90 days of operation, while continuous Always-ON mode runs 24 to 30 hours on a full charge.

Does the light get hot or make noise when it runs for hours?

The LED panel stays cool and silent during extended use; the only power draw is the 5 V USB recharge cycle every few weeks.

What mounting hardware do I need to have on hand before installing it?

The box includes an iron base, four screws, four plastic anchors, and double-sided adhesive tape — no extra tools or parts required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.