Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00936593BTC
In stock
Thomasville Lighting FLSL-R5032-RGB-US 32.8FT LED light kit
A 32.8 ft indoor LED strip kit with 300 cuttable LEDs, 44-key infrared remote, six dynamic modes, two speed settings and a 12 V power supply
- Product nameDAYBETTER FLSL-R5032-RGB-US
- finishWhite
- glassClear Prismatic
- size32.8FT
- type of bulbLED
- voltage12 volts
- 8 ft LED strip covers large areas with 300 LEDs
- Infrared remote selects RGB colours, white tones and six dynamic modes
- Strong self-adhesive backing mounts securely on walls, cabinets and TVs
- Cuttable every three LEDs lets you customise length without extra tools
- 12 V power supply and 44-key controller included for instant setup
32.8 ft RGB LED Strip Kit
This 32.8 ft RGB LED strip kit includes two 16.4 ft rolls, a 12 volt power supply, an infrared controller box and a 44 key remote. It is designed for indoor decoration on TVs, cabinets, desks and walls. The self adhesive backing holds the strips in place on clean, non conductive surfaces.
12 Volt 12 Watt Power Requirement
The kit runs on a 12 volt supply drawing 12 watts and carries FCC ID 2AZ2N-BT001. Buyers who need a different voltage, higher wattage or outdoor rated lighting cannot use this product. The controller accepts only the included infrared remote, so app or voice control is not supported.
Cut Every Three LEDs and Test First
Strips can be cut every three LEDs along the marked lines and extended with extra connectors. Installation requires a clean surface; sticking to metal risks a short circuit. Test the lights before final mounting, do not leave them coiled for more than two minutes and ensure airflow for cooling. Connect the 4 pin arrows to the positive side or the strip will not work.
Highlights
- 8 ft LED strip covers large areas with 300 LEDs
- Infrared remote selects RGB colours, white tones and six dynamic modes
- Strong self-adhesive backing mounts securely on walls, cabinets and TVs
- Cuttable every three LEDs lets you customise length without extra tools
- 12 V power supply and 44-key controller included for instant setup
Specifications
| Brand | Thomasville Lighting |
|---|---|
| Model | FLSL-R5032-RGB-US |
| Product name | DAYBETTER FLSL-R5032-RGB-US |
| Part Number | R5032-RGB |
| finish | White |
| glass | Clear Prismatic |
| size | 32.8FT |
| type of bulb | LED |
| voltage | 12 volts |
| electrical usage (watts) | 12 watts |
| certification | has_fcc_id, 2AZ2N-BT001 |
| installation | light strips, infrared remote and receiver, 12-volt power supply, instruction manual, Corded Electric, indoor |
| usage | Indoor Only |
| control type | remote |
| features | LED |
| country of origin | DAYBETTER |
| care | indoor |
| warranties | 2 year. |
| weight | 0.2 kilograms |
| description | DAYBETTER, Multicolor, 32.8FT, FLSL-R5032-RGB-US-V2, 2 year. |
Questions about this item
How much power does the 32.8 ft strip draw once it is plugged into the 12-volt supply?
The kit is rated at 12 watts total, so the entire 32.8 ft length will draw about 1 amp from the included 12-volt power supply.
What connection does the 44-key infrared remote use to talk to the controller box?
The remote communicates with the IR box controller by infrared line-of-sight; there is no Bluetooth, Wi-Fi or app link on this model.
What surface preparation and clearance does the self-adhesive strip need for a secure mount?
Clean the mounting surface so the adhesive bonds on the first press, avoid conductive metal that could short the strip, and keep the strip unspooled with airflow so the LEDs can dissipate heat.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
