We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Thomasville Lighting FL20Y 8-pack solar fence light kit

SKU CH-WBAG-DNKXT MPN FL20Y

Eight solar fence lights with convex lenses, IP65 waterproofing and screw or tape mounting

  • Product namePeasur
  • featuresLED
  • includedsolar fence lights*8, stainless steel screws *16, double-sid
  • careOutdoor use only; waterproof
  • weight0.399 kilograms
  • descriptionPeasur, Acrylonitrile Butadiene Styrene, LED, Solar Powered,
  • Convex lens focuses LED light for decorative illumination
  • IP65 waterproof ABS withstands heavy rain and high temperature
  • Two mounting options: 16 stainless steel screws or 8 double-sided tape pads
  • Auto on/off with 20% solar conversion rate and 2700k warm white glow
  • Eight-light kit weighs .399 kg; each unit 3.15 x 1.57 x 1.06 in

Eight light kit for fences and railings

The Thomasville Lighting FL20Y kit supplies eight solar powered LED units designed for outdoor accent lighting on fences, railings, balconies and porches. Each unit uses a convex lens to focus a warm white glow at 2700k. The kit suits homeowners who want automatic dusk to dawn illumination without wiring or electricity cost. It is not for buyers who need broad floodlight coverage or high lumen output for security purposes.

ABS housing with IP65 rating and dual mounting

The lights are moulded from acrylonitrile butadiene styrene with a clear prismatic acrylic lens and carry an IP65 waterproof rating for rain and high temperature exposure. Installation uses either the sixteen included stainless steel screws or eight double sided tape pads for screw free mounting on wood, brick or flat fence edges. The compact 3.15 by 1.57 by 1.06 inch form factor fits narrow surfaces but is not suited to circular railings. Buyers without a flat mounting plane cannot use the adhesive option reliably.

Solar charging with automatic operation

A photovoltaic panel with up to 20 percent conversion rate charges the internal battery during daylight and the fixture switches on automatically at night. The warm white LEDs provide gentle accent light for step edges and decorative highlights rather than area lighting. The total kit weighs 0.399 kilograms. Users must ensure the power switch is on before the first charge cycle. Shaded locations will reduce nightly run time.

Highlights

  • Convex lens focuses LED light for decorative illumination
  • IP65 waterproof ABS withstands heavy rain and high temperature
  • Two mounting options: 16 stainless steel screws or 8 double-sided tape pads
  • Auto on/off with 20% solar conversion rate and 2700k warm white glow
  • Eight-light kit weighs .399 kg; each unit 3.15 x 1.57 x 1.06 in

Specifications

BrandThomasville Lighting
ModelFL20Y
Product namePeasur
featuresLED
includedsolar fence lights*8, stainless steel screws *16, double-sided tape*8
careOutdoor use only; waterproof
weight0.399 kilograms
descriptionPeasur, Acrylonitrile Butadiene Styrene, LED, Solar Powered, solar fence lights*8, 4 L x 2.7 W x 8 H centimeters
Part NumberFL20Y
finishWhite
glassClear Prismatic
size8 Packs
type of bulbLED
installationSurface Mount, Adhesive Mount
usageIndoor / Outdoor
styleContemporary
materialAcrylic

Questions about this item

What IP rating does the FL20Y have and what does it protect against?

The FL20Y carries an IP65 rating, meaning it is dust-tight and protected against low-pressure water jets from any direction, so heavy rain will not affect operation.

What mounting hardware is included and what surfaces can it attach to?

The kit supplies 16 stainless-steel screws and 8 double-sided tape pads, letting you secure each light to wood, brick or other flat fence materials without wiring.

How do I install the lights and what common step causes them to stay dark?

Mount each unit with the supplied screws or tape, then ensure the built-in switch is turned on before the first charge; forgetting this step is the usual reason a new light does not activate at night.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.